Author Topic: CT- East Coast: 85 4Runner Parts (Read 2670 times)

CTENG in KS · « **on:** May 22, 2005, 01:08:16 PM »

Alrighty, I have just removed my rear springs, pack is in pretty good shape and looking for a new home, I went with Marlin's fronts so I dont need em. I also have the u-bolts, mounting plates, etc. Will soon have the front packs for extra leaves.
I also have some 4.10 open carrier 4cyl diffs. Later on, in about two weeks I will have a full stock steering setup too.

CTENG in KS · « **Reply #1 on:** May 23, 2005, 06:53:07 AM »

I see there are no peeps on this side of the earth that need rears huh...?

simmont · « **Reply #2 on:** May 23, 2005, 01:52:27 PM »

how much for the 4:10 carriers I need front and rear for my 85. I'm in pa.

CTENG in KS · « **Reply #3 on:** May 24, 2005, 02:43:48 PM »

$50.00 OK?

simmont · « **Reply #4 on:** May 24, 2005, 03:12:35 PM »

is that for both front and rear

CTENG in KS · « **Reply #5 on:** May 25, 2005, 08:22:17 PM »

sure...I just need to get em out of the garage.

simmont · « **Reply #6 on:** May 26, 2005, 05:07:28 PM »

give me a shipping quote to 18041. thanks a-lot

CTENG in KS · « **Reply #7 on:** May 27, 2005, 10:53:07 AM »

Alright...gonna have to get back to you on tuesday bout that...won't know weight until I get over to my garage and break out the scale...

Makman · « **Reply #8 on:** May 27, 2005, 12:41:22 PM »

4.10 3rd members are about 50# I think...assuming 4 cylinder version. Keep in mind that it takes some pretty beefy packaging to keep the third member from ejecting itself from a box. Just my two cents.

CTENG in KS · « **Reply #9 on:** May 27, 2005, 01:52:26 PM »

No worries, before I got engineerfied, I was a mover.

simmont · « **Reply #10 on:** May 27, 2005, 03:58:24 PM »

sounds good to me just let meknow about it.

Author Topic: CT- East Coast: 85 4Runner Parts (Read 2670 times)

CTENG in KS

CT- East Coast: 85 4Runner Parts

CTENG in KS [OP]

Re: CT- East Coast: 85 4Runner Parts

simmont

Re: CT- East Coast: 85 4Runner Parts

CTENG in KS [OP]

Re: CT- East Coast: 85 4Runner Parts

simmont

Re: CT- East Coast: 85 4Runner Parts

CTENG in KS [OP]

Re: CT- East Coast: 85 4Runner Parts

simmont

Re: CT- East Coast: 85 4Runner Parts

CTENG in KS [OP]

Re: CT- East Coast: 85 4Runner Parts

Makman

Re: CT- East Coast: 85 4Runner Parts

CTENG in KS [OP]

Re: CT- East Coast: 85 4Runner Parts

simmont

Re: CT- East Coast: 85 4Runner Parts

Related Topics


	Author Topic: CT- East Coast: 85 4Runner Parts (Read 2670 times) 0 Members and 1 Guest are viewing this topic. CTENG in KS Trade Count: (0) Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great CT- East Coast: 85 4Runner Parts « on: May 22, 2005, 01:08:16 PM » Alrighty, I have just removed my rear springs, pack is in pretty good shape and looking for a new home, I went with Marlin's fronts so I dont need em. I also have the u-bolts, mounting plates, etc. Will soon have the front packs for extra leaves. I also have some 4.10 open carrier 4cyl diffs. Later on, in about two weeks I will have a full stock steering setup too. Report to moderator Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 CTENG in KS [OP] Trade Count: (0) Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: CT- East Coast: 85 4Runner Parts « Reply #1 on: May 23, 2005, 06:53:07 AM » I see there are no peeps on this side of the earth that need rears huh...? Report to moderator Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 simmont Trade Count: (0) Rock Crawl'n Turtle Points: 2 Posts: 39 Member since May '05 DON'T BUY IT BUILD IT Re: CT- East Coast: 85 4Runner Parts « Reply #2 on: May 23, 2005, 01:52:27 PM » how much for the 4:10 carriers I need front and rear for my 85. I'm in pa. Report to moderator Logged 89 Single cab, ground up build starting now. 2014 1794 Tundra Crew Max Daily Driver "work truck". SOLD:85 REG CAB 22R FULL WIDTH 38'S DUAL CASES CUSTOM FRONT WINCH BUMPER CUSTOM CAGE HYDRO ASSIST LOCK ALL AROUND. SOLD:DALIY DRIVER : 85 RUNNER 22RE 4" LIFT 33"x12.5x15 HI STEER DIFF ARMOR TRUSSED DUAL CASES LOCKED ALL AROUND. CTENG in KS [OP] Trade Count: (0) Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: CT- East Coast: 85 4Runner Parts « Reply #3 on: May 24, 2005, 02:43:48 PM » $50.00 OK? Report to moderator Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 simmont Trade Count: (0) Rock Crawl'n Turtle Points: 2 Posts: 39 Member since May '05 DON'T BUY IT BUILD IT Re: CT- East Coast: 85 4Runner Parts « Reply #4 on: May 24, 2005, 03:12:35 PM » is that for both front and rear Report to moderator Logged 89 Single cab, ground up build starting now. 2014 1794 Tundra Crew Max Daily Driver "work truck". SOLD:85 REG CAB 22R FULL WIDTH 38'S DUAL CASES CUSTOM FRONT WINCH BUMPER CUSTOM CAGE HYDRO ASSIST LOCK ALL AROUND. SOLD:DALIY DRIVER : 85 RUNNER 22RE 4" LIFT 33"x12.5x15 HI STEER DIFF ARMOR TRUSSED DUAL CASES LOCKED ALL AROUND. CTENG in KS [OP] Trade Count: (0) Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: CT- East Coast: 85 4Runner Parts « Reply #5 on: May 25, 2005, 08:22:17 PM » sure...I just need to get em out of the garage. Report to moderator Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 simmont Trade Count: (0) Rock Crawl'n Turtle Points: 2 Posts: 39 Member since May '05 DON'T BUY IT BUILD IT Re: CT- East Coast: 85 4Runner Parts « Reply #6 on: May 26, 2005, 05:07:28 PM » give me a shipping quote to 18041. thanks a-lot Report to moderator Logged 89 Single cab, ground up build starting now. 2014 1794 Tundra Crew Max Daily Driver "work truck". SOLD:85 REG CAB 22R FULL WIDTH 38'S DUAL CASES CUSTOM FRONT WINCH BUMPER CUSTOM CAGE HYDRO ASSIST LOCK ALL AROUND. SOLD:DALIY DRIVER : 85 RUNNER 22RE 4" LIFT 33"x12.5x15 HI STEER DIFF ARMOR TRUSSED DUAL CASES LOCKED ALL AROUND. CTENG in KS [OP] Trade Count: (0) Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: CT- East Coast: 85 4Runner Parts « Reply #7 on: May 27, 2005, 10:53:07 AM » Alright...gonna have to get back to you on tuesday bout that...won't know weight until I get over to my garage and break out the scale... Report to moderator Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 Makman Trade Count: (0) Rock Crawl'n Turtle Points: 0 Posts: 98 Member since Apr '05 Crawling with Marlin Re: CT- East Coast: 85 4Runner Parts « Reply #8 on: May 27, 2005, 12:41:22 PM » 4.10 3rd members are about 50# I think...assuming 4 cylinder version. Keep in mind that it takes some pretty beefy packaging to keep the third member from ejecting itself from a box. Just my two cents. Report to moderator Logged If it never breaks, people can only speculate how much it was overbuilt. CTENG in KS [OP] Trade Count: (0) Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: CT- East Coast: 85 4Runner Parts « Reply #9 on: May 27, 2005, 01:52:26 PM » No worries, before I got engineerfied, I was a mover. Report to moderator Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 simmont Trade Count: (0) Rock Crawl'n Turtle Points: 2 Posts: 39 Member since May '05 DON'T BUY IT BUILD IT Re: CT- East Coast: 85 4Runner Parts « Reply #10 on: May 27, 2005, 03:58:24 PM » sounds good to me just let meknow about it. Report to moderator Logged 89 Single cab, ground up build starting now. 2014 1794 Tundra Crew Max Daily Driver "work truck". SOLD:85 REG CAB 22R FULL WIDTH 38'S DUAL CASES CUSTOM FRONT WINCH BUMPER CUSTOM CAGE HYDRO ASSIST LOCK ALL AROUND. SOLD:DALIY DRIVER : 85 RUNNER 22RE 4" LIFT 33"x12.5x15 HI STEER DIFF ARMOR TRUSSED DUAL CASES LOCKED ALL AROUND.