Topic: 22R Carbs

[H8PVMNT]

I am trying to get a huge pile of junk carbs for bits and pieces when I rebuild them for myself and others.  If you are junking a stock carb let me know via PM and I will give a few bucks and shipping for it.

 

[Lewis Hein]

A thought: you might also consider getting a Taig lathe and/or milling machine. I have both and they have been great for making small parts that no-one sells any more ... such as might be found on a 22r carb.

Their website is: www.taigtools.com
There is a dealer who has a bunch of good stuff about the Taig machines on his webpage: www.cartertools.com

Alternatively, if you ever need some small machining job done, I have some tools already, in addition to a small aluminum foundry that used to be a propane tank. And you know how to send me a PM...

If you can afford it, you might also consider an old Atlas or South Bend bench lathe. Bigger=more useful=more $$$.

[H8PVMNT [OP]]

I need a tool to drive valve guides. Just a piece of maybe 1/2" mild steel rod stepped down to the size of a valve stem with drilled out spot on the end you drive.  Want to make one?

[Lewis Hein]

Sure. Do you happen to know the diameter and length of the valve stem?

[H8PVMNT [OP]]

Sure. Do you happen to know the diameter and length of the valve stem?

Not yet. But I can figure it out.

[lamkinranch]

I need a good working carb for a 79 20R.  Do you have anything? 

I have three or four parts carbs out here also that I am willing to part with. Email me at lamkinranch@gmail.com please! I don't always get on here.

Thanks in advance.

Kris

[H8PVMNT [OP]]

I need a good working carb for a 79 20R.  Do you have anything? 

I have three or four parts carbs out here also that I am willing to part with. Email me at lamkinranch@gmail.com please! I don't always get on here.

Thanks in advance.

Kris

I have a couple old ones I can probably rebuild one for you if you want.  Shot you an e-mail.

[AZ Rockit]

I need a good working carb for a 79 20R.  Do you have anything? 

I have three or four parts carbs out here also that I am willing to part with. Email me at lamkinranch@gmail.com please! I don't always get on here.

Thanks in advance.

Kris

maybe now is the time to upgrade 

http://www.lceperformance.com/Aisin-22R-Carb-to-20R-Manifold-Adapter-Kit-p/1033000.htm