0 Members and 1 Guest are viewing this topic.
Question is.. will everything still run fine?It looks as if this truck originally came with an O2 sensor in the manifold as well... ? I'm planning on running the OE 20r Exhaust manifold till I get some more $$$ For a header. Any help/opinions/experience would be much appreciated. Thank you.
first question, where are you?? this impacts alot.second, unless you dont have anything else dont run a 20R exhaust, run a 22R stock manifold. it flows better and will bolt right up. propane will run great with a high compression ratio. but you want about a 325 cfm intake so what are you using for a "carb" with the propane setup??
ok, that looks good. if its never going to be smogged i would just wrap all that wiring up and zip tie it together so if you ever sold it or wanted to road it again you could.yes, pull that 20R exhaust and install the 22R exhaust, see if you can find the twin tube one that runs down to about the cat area. these allow more flow and give a little more torque.
Started by pardyam Parts Wanted
Started by bslh8tr Parts Wanted
Started by lone walker Parts For Sale
Started by lone walker Parts Wanted
Started by Speed Project Research and Build-Ups