Author Topic: I need a new Radiator - recommendations? (Read 2074 times)

GreyBeard · « **on:** Jun 07, 2011, 09:21:54 PM »

As the subject says, I need a new radiator. The local radiator shop says $200 for an aluminum core with plastic tanks. For a copper core with brass tanks it's $425!

Anybody have a recommendation where to get a good quality copper/brass radiator for a reasonable price?

Thanks,
Dennis

79coyotefrg · « **Reply #1 on:** Jun 07, 2011, 09:38:19 PM »

make a post in this thread and tell her what you need. they are in StLouis MO and will ship all over the lower 48
http://board.marlincrawler.com/index.php?topic=39620.1410

GreyBeard · « **Reply #2 on:** Jun 07, 2011, 09:44:29 PM »

I checked out the thread, and it doesn't appear that anybody is having success with that "vendor".

Thanks,
Dennis

Kentucky Jelly · « **Reply #3 on:** Jun 07, 2011, 10:41:26 PM »

Here... http://www.davezoffroadperformance.com/store/drivetrain/radiators.html

86bobbedtoy · « **Reply #4 on:** Jun 07, 2011, 10:53:24 PM »

I have one from a 1993 4cyl
it worked and looks in great condition,
Ill do a pressure check
40 plus shipping or 30 if you come get it

emsvitil · « **Reply #5 on:** Jun 07, 2011, 11:11:41 PM »

I think a CU1430 from rockauto should fit.

Check the measurements, I think it's an inch taller that what you have.

3 row, copper/brass (so you can solder it if you have too) (get it before they decide to change it a POS plastic/aluminum)

I plan on getting one for my 86 truck (when I finally get a refund from another place that couldn't get me one)

Don't forget the rockauto 5% discount (search the web or wait until I make a post in chit-chat)

bigarms23 · « **Reply #6 on:** Jun 07, 2011, 11:38:12 PM »

try www.radiators.com and an aftermarket one will run you 107.99 through this website

Snowtoy · « **Reply #7 on:** Jun 10, 2011, 02:16:36 AM »

Check radiatorbarn.com, an all metal 3row for my 3.0 ran $202.95 shipping included.

raywynn · « **Reply #8 on:** Jun 28, 2011, 03:35:12 PM »

Quote from: Snowtoy on Jun 10, 2011, 02:16:36 AM

Check radiatorbarn.com, an all metal 3row for my 3.0 ran $202.95 shipping included.

x2 I just got my rad for a first gen from radiatorbarn.com for 160 got here quick and easy

Author Topic: I need a new Radiator - recommendations? (Read 2074 times)

GreyBeard

I need a new Radiator - recommendations?

79coyotefrg

Re: I need a new Radiator - recommendations?

GreyBeard [OP]

Re: I need a new Radiator - recommendations?

Kentucky Jelly

Re: I need a new Radiator - recommendations?

86bobbedtoy

Re: I need a new Radiator - recommendations?

emsvitil

Re: I need a new Radiator - recommendations?

bigarms23

Re: I need a new Radiator - recommendations?

Snowtoy

Re: I need a new Radiator - recommendations?

raywynn

Re: I need a new Radiator - recommendations?

Related Topics


	Author Topic: I need a new Radiator - recommendations? (Read 2074 times) 0 Members and 1 Guest are viewing this topic. GreyBeard Rock Crawl'n Turtle Points: -1 Posts: 17 Member since Dec '06 I'm gettin' too old for this... I need a new Radiator - recommendations? « on: Jun 07, 2011, 09:21:54 PM » As the subject says, I need a new radiator. The local radiator shop says $200 for an aluminum core with plastic tanks. For a copper core with brass tanks it's $425! Anybody have a recommendation where to get a good quality copper/brass radiator for a reasonable price? Thanks, Dennis Logged '87 4Runner, 22RE, 5 speed, 4.7 Txfer, 4.88:1 f/r, ARBs f/r, 33x10.5x15 BFG Allterrains, Marlin front bumper, CBI-fab bolt-on sliders and rear bumper w/tire mount, and Sigh...still IFS 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: I need a new Radiator - recommendations? « Reply #1 on: Jun 07, 2011, 09:38:19 PM » make a post in this thread and tell her what you need. they are in StLouis MO and will ship all over the lower 48 http://board.marlincrawler.com/index.php?topic=39620.1410 Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way GreyBeard [OP] Rock Crawl'n Turtle Points: -1 Posts: 17 Member since Dec '06 I'm gettin' too old for this... Re: I need a new Radiator - recommendations? « Reply #2 on: Jun 07, 2011, 09:44:29 PM » I checked out the thread, and it doesn't appear that anybody is having success with that "vendor". Thanks, Dennis Logged '87 4Runner, 22RE, 5 speed, 4.7 Txfer, 4.88:1 f/r, ARBs f/r, 33x10.5x15 BFG Allterrains, Marlin front bumper, CBI-fab bolt-on sliders and rear bumper w/tire mount, and Sigh...still IFS Kentucky Jelly Rock Master Turtle Points: 1 Posts: 144 Member since May '09 Re: I need a new Radiator - recommendations? « Reply #3 on: Jun 07, 2011, 10:41:26 PM » Here... http://www.davezoffroadperformance.com/store/drivetrain/radiators.html Logged 87 4Runner, IFS, 22RE, W56, 33x10.5 KM2's, 4.88's, ARB Rear, Downey Skid, BudBuilt X-member, Home Fab Front and Rear Bumpers, Sliders, MM Winch, A/C OBA, HID Hella 500's, Downey Header + Flowmaster, Fuel Tank Lift, EB Street RV Head, 268c Cam, Supra AFM, Bored and Balanced Bottom End, Long Travel Some Day, More To Come! 86bobbedtoy Silver Turtle Award Turtle Points: 686 Posts: 3,938 Member since Oct '06 Re: I need a new Radiator - recommendations? « Reply #4 on: Jun 07, 2011, 10:53:24 PM » I have one from a 1993 4cyl it worked and looks in great condition, Ill do a pressure check 40 plus shipping or 30 if you come get it Logged emsvitil Silver Turtle Award Turtle Points: 7571 Posts: 3,561 Member since May '07 Re: I need a new Radiator - recommendations? « Reply #5 on: Jun 07, 2011, 11:11:41 PM » I think a CU1430 from rockauto should fit. Check the measurements, I think it's an inch taller that what you have. 3 row, copper/brass (so you can solder it if you have too) (get it before they decide to change it a POS plastic/aluminum) I plan on getting one for my 86 truck (when I finally get a refund from another place that couldn't get me one) Don't forget the rockauto 5% discount (search the web or wait until I make a post in chit-chat) Logged Ed SoCal 86 SR5 XtraCab 22RE W56B 31x10.50R15 bigarms23 The 2.5K Group Turtle Points: 111 Posts: 2,897 Member since Jun '07 Re: I need a new Radiator - recommendations? « Reply #6 on: Jun 07, 2011, 11:38:12 PM » try www.radiators.com and an aftermarket one will run you 107.99 through this website Logged 88 4runner 92 cpi duals 37 radial rockers and 4.8 coming soon Snowtoy The 2.5K Group Turtle Points: 1403 Posts: 2,583 Member since Sep '03 Re: I need a new Radiator - recommendations? « Reply #7 on: Jun 10, 2011, 02:16:36 AM » Check radiatorbarn.com, an all metal 3row for my 3.0 ran $202.95 shipping included. Logged '90 black X-cab mod'd 3.0, 33's/4.88's, rear ARB, custom bumpers, sliders, safari rack, etc. '91 Blue X-cab 22re, 35's/5.29's,Truetrac front, ARB rear, dual cases, and custom Safari flatbed, bumper, interior. The money pit '87 Supra resto/mod raywynn Rock Crawl'n Turtle Points: 0 Posts: 14 Member since Apr '11 Re: I need a new Radiator - recommendations? « Reply #8 on: Jun 28, 2011, 03:35:12 PM » Quote from: Snowtoy on Jun 10, 2011, 02:16:36 AM Check radiatorbarn.com, an all metal 3row for my 3.0 ran $202.95 shipping included. x2 I just got my rad for a first gen from radiatorbarn.com for 160 got here quick and easy Logged '79 Short Bed 20r, L43, 35's '95 4runner limited all stock