Author Topic: really need a 22re wiring harness (Read 8816 times)

Jokeass-Wheelers · « **on:** Jan 15, 2011, 10:00:25 PM »

i think the one i bought with the 22re i am swaping in my first gen is junk it looks all right but i aint getting no power have looked over it and still nothing and today i got results in melting wires... so if anyone has one please let me know located in paradise ca

81_yota · « **Reply #1 on:** Jan 15, 2011, 10:17:54 PM »

what year harness i know a guy on here he has a 88 harness

yoshaleng · « **Reply #2 on:** Jan 16, 2011, 01:23:24 AM »

I have a 92 harness minus the injector plugs.

HogCanyonHopper · « **Reply #3 on:** Jan 16, 2011, 05:27:09 AM »

I have a wrecked '91 4Runner that still has harness in it.

santa cruz crawler · « **Reply #4 on:** Jan 16, 2011, 06:19:54 AM »

There's a junction right behind the drivers side head light
It's grey, Mabe un clip and re clip it
Some times my friends truck looses all power "all power to everything "
What I did was smack this junction and everything came back on !!
Its just my experience

Jokeass-Wheelers · « **Reply #5 on:** Jan 16, 2011, 01:29:30 PM »

well my truck is a 1982 and i have put a 1990 4x4 22re in it motor is fine and i have checked and re checked and i have all the sensors and everything

yotaneck13 · « **Reply #6 on:** Jan 25, 2011, 11:50:18 AM »

if you need jus the motor portion of the harness ill sell mine but im not selling the in cab portion or body as im making a conversion harness

Jokeass-Wheelers · « **Reply #7 on:** Jan 25, 2011, 05:10:46 PM »

Rats. Lol I need the whole harness

splasher · « **Reply #8 on:** Jan 26, 2011, 07:05:11 PM »

I have a complete 2nd gen 'Runner harness here in Clovis.....or give Dave'Z Offroad a call.....

http://www.davezoffroadperformance.com/forum/index.php

yotaneck13 · « **Reply #9 on:** Feb 21, 2011, 11:06:12 PM »

did you find a harness?

Jokeass-Wheelers · « **Reply #10 on:** Feb 22, 2011, 07:14:35 AM »

Well I hope I fixed the one I got I finally got power to everything and I got it to turn over today is going to be gas and hope it starts

yotaneck13 · « **Reply #11 on:** Feb 22, 2011, 07:17:26 AM »

let my kno i picked up an ex cab and no longer need my 90 harness there are a few parts not good on it (redneck engineered by the po) but jus by the bat like the main white power wire and ground

Jokeass-Wheelers · « **Reply #12 on:** Feb 22, 2011, 05:32:48 PM »

Well where are you located ?

yotaneck13 · « **Reply #13 on:** Feb 22, 2011, 06:10:13 PM »

pa but i could prob stuff it in a cupple flat rate boxes

Jokeass-Wheelers · « **Reply #14 on:** Feb 22, 2011, 06:43:02 PM »

How far is that from paradise ca 95969?

yotaneck13 · « **Reply #15 on:** Feb 22, 2011, 08:42:51 PM »

the hole way across the country man im in pennsylvania

Jokeass-Wheelers · « **Reply #16 on:** Feb 23, 2011, 04:34:45 PM »

Oh lol that's pretty far well if you getan estimate I will let ya know

yotaneck13 · « **Reply #17 on:** Feb 23, 2011, 10:47:06 PM »

shipping would only be like 20 or 30 depending on how many boxes it takes mabye even less but im not ready to pull it yet im wheelin the truck sunday then i may start my build but im not sure yet

Jokeass-Wheelers · « **Reply #18 on:** Feb 25, 2011, 08:30:54 AM »

Ok well just pm me when you start

yotaneck13 · « **Reply #19 on:** Feb 25, 2011, 10:07:57 AM »

sounds good

Jokeass-Wheelers · « **Reply #20 on:** May 05, 2011, 05:29:23 PM »

Still need one for cheap or trade I need one for 1990 Toyota regular cab 4x4 maybe trade?? I will trade a Exo cage that fits a 1982 Toyota regular cab never been rolled or flopped just got it done let me kno text 530-521-6332

yotaneck13 · « **Reply #21 on:** May 05, 2011, 08:05:59 PM »

got mine pulled and the wires behind the fuse box in the cab (drivers kick panel) are all fried and corroded together so unless you want to splice 2 together mine wont do you any good musta been the problem y i couldnt get my truck to run right

Jokeass-Wheelers · « **Reply #22 on:** May 05, 2011, 08:47:24 PM »

NHL that's the problem with mine that's why I would rather get a good one

yotaneck13 · « **Reply #23 on:** May 05, 2011, 08:54:59 PM »

will a 91 work i may have the one out of my ex cab

Jokeass-Wheelers · « **Reply #24 on:** May 06, 2011, 07:22:14 AM »

Ya but it would cost so much money to ship it to Penn...

yotaneck13 · « **Reply #25 on:** May 06, 2011, 07:46:19 AM »

nah not really

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Jokeass-Wheelers [OP]

Related Topics