Author Topic: 73-83 toyota rear springs, and 1" wheel spacers (Read 3039 times)

GRM · « **on:** Dec 17, 2004, 06:12:17 PM »

I need a pair of stock higth 79-83 toyota rear 4wd springs

Also need a pair of 6 lug 1" wheel spacers.

yotaboy79 · « **Reply #1 on:** Dec 18, 2004, 07:58:31 PM »

if you wanna pay for shipping from oregon i can probably find you some, do you want 2wd or 4wd

GRM · « **Reply #2 on:** Dec 18, 2004, 08:53:30 PM »

shipping would probabally be $50-80. Not worth it when I can pick up a pair for $60 at the local wreckers.

davescrawler · « **Reply #3 on:** Dec 18, 2004, 08:59:05 PM »

where are you at i have some springs in placerville 45 minutes from sacramento

WHITE_TRASH · « **Reply #4 on:** Dec 18, 2004, 10:27:10 PM »

2 wheel drive's give you about 2" more lift and they will accept standard bushings like a normal front spring.

kneedownnate · « **Reply #5 on:** Dec 19, 2004, 12:59:33 PM »

WT, stock rear 2wd springs give about 2" lift? If I remember right they're the same lenght untill '89? If that's the case do you think '87 2wd springs will allow the same lift? Please say yes, I have a set of very low mile '87 2wd rears and will very happily slap em into the rear of my '80 4by if they'll lift it. Nate

yotaboy79 · « **Reply #6 on:** Dec 19, 2004, 08:38:02 PM »

i think hes talking about putting them on the front, but i believe they will lift the rear a little how much

lilbuddy · « **Reply #7 on:** Dec 19, 2004, 08:57:56 PM »

I have some 81 4x4 rears. PM Me... Im in Chico, CA

lilbuddy · « **Reply #8 on:** Dec 19, 2004, 09:17:18 PM »

actually scratch that, i only have fronts...sorry

WHITE_TRASH · « **Reply #9 on:** Dec 19, 2004, 09:20:28 PM »

If you were to put 4x packs in the front and then pull them and install 2x rears, the 2x's would be about 2" higher. And yes 79-88 are the same.

kneedownnate · « **Reply #10 on:** Dec 19, 2004, 10:18:14 PM »

Any idear what the spring rate difference would be? I've thought about this for a few years, but have never got a solid answer out of anybody, Nate

Author Topic: 73-83 toyota rear springs, and 1" wheel spacers (Read 3039 times)

GRM

73-83 toyota rear springs, and 1" wheel spacers

yotaboy79

Re: 73-83 toyota rear springs, and 1" wheel spacers

GRM [OP]

Re: 73-83 toyota rear springs, and 1" wheel spacers

davescrawler

Re: 73-83 toyota rear springs, and 1" wheel spacers

WHITE_TRASH

Re: 73-83 toyota rear springs, and 1" wheel spacers

kneedownnate

Re: 73-83 toyota rear springs, and 1" wheel spacers

yotaboy79

Re: 73-83 toyota rear springs, and 1" wheel spacers

lilbuddy

Re: 73-83 toyota rear springs, and 1" wheel spacers

lilbuddy

Re: 73-83 toyota rear springs, and 1" wheel spacers

WHITE_TRASH

Re: 73-83 toyota rear springs, and 1" wheel spacers

kneedownnate

Re: 73-83 toyota rear springs, and 1" wheel spacers

Related Topics


	Author Topic: 73-83 toyota rear springs, and 1" wheel spacers (Read 3039 times) 0 Members and 1 Guest are viewing this topic. GRM Trade Count: (0) Rock Master Turtle Points: 0 Posts: 206 Member since Dec '03 Crawling with Marlin 73-83 toyota rear springs, and 1" wheel spacers « on: Dec 17, 2004, 06:12:17 PM » I need a pair of stock higth 79-83 toyota rear 4wd springs Also need a pair of 6 lug 1" wheel spacers. Report to moderator Logged yotaboy79 stuck in the shop Trade Count: (0) The 2.5K Group Turtle Points: -19 Posts: 2,838 Member since Aug '03 Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #1 on: Dec 18, 2004, 07:58:31 PM » if you wanna pay for shipping from oregon i can probably find you some, do you want 2wd or 4wd Report to moderator Logged the old build http://board.marlincrawler.com/index.php?topic=7758.0 the new build http://board.marlincrawler.com/index.php?topic=57776.0 GRM [OP] Trade Count: (0) Rock Master Turtle Points: 0 Posts: 206 Member since Dec '03 Crawling with Marlin Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #2 on: Dec 18, 2004, 08:53:30 PM » shipping would probabally be $50-80. Not worth it when I can pick up a pair for $60 at the local wreckers. Report to moderator Logged davescrawler Trade Count: (0) Rock Crawl'n Turtle Points: 29 Posts: 66 Member since Oct '04 Crawling with Marlin Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #3 on: Dec 18, 2004, 08:59:05 PM » where are you at i have some springs in placerville 45 minutes from sacramento Report to moderator Logged 81 longbed turned flatbed EFI,triple t case,37MTRS,detroit locker,lock right, WHITE_TRASH Trade Count: (0) Gold Turtle Award Turtle Points: 679 Posts: 6,277 Member since Feb '03 Don't blame me, I didn't vote for this crap. Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #4 on: Dec 18, 2004, 10:27:10 PM » 2 wheel drive's give you about 2" more lift and they will accept standard bushings like a normal front spring. Report to moderator Logged Full hydro, 186:1 with an auto and 44's what could go wrong?? kneedownnate Trade Count: (+1) Gold Turtle Award Turtle Points: 1128 Posts: 9,757 Member since Oct '04 Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #5 on: Dec 19, 2004, 12:59:33 PM » WT, stock rear 2wd springs give about 2" lift? If I remember right they're the same lenght untill '89? If that's the case do you think '87 2wd springs will allow the same lift? Please say yes, I have a set of very low mile '87 2wd rears and will very happily slap em into the rear of my '80 4by if they'll lift it. Nate Report to moderator Logged RIP KYOTA You can go through life being scared of the possible, or you can have a little fun and tease the inevitable. Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life! yotaboy79 stuck in the shop Trade Count: (0) The 2.5K Group Turtle Points: -19 Posts: 2,838 Member since Aug '03 Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #6 on: Dec 19, 2004, 08:38:02 PM » i think hes talking about putting them on the front, but i believe they will lift the rear a little how much Report to moderator Logged the old build http://board.marlincrawler.com/index.php?topic=7758.0 the new build http://board.marlincrawler.com/index.php?topic=57776.0 lilbuddy Rock Ninja Trade Count: (0) Gold Turtle Award Turtle Points: -234 Posts: 5,720 Member since Aug '04 Hella.... Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #7 on: Dec 19, 2004, 08:57:56 PM » I have some 81 4x4 rears. PM Me... Im in Chico, CA Report to moderator Logged RIP Kyota.... you are the man GET IT!!! lilbuddy Rock Ninja Trade Count: (0) Gold Turtle Award Turtle Points: -234 Posts: 5,720 Member since Aug '04 Hella.... Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #8 on: Dec 19, 2004, 09:17:18 PM » actually scratch that, i only have fronts...sorry Report to moderator Logged RIP Kyota.... you are the man GET IT!!! WHITE_TRASH Trade Count: (0) Gold Turtle Award Turtle Points: 679 Posts: 6,277 Member since Feb '03 Don't blame me, I didn't vote for this crap. Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #9 on: Dec 19, 2004, 09:20:28 PM » If you were to put 4x packs in the front and then pull them and install 2x rears, the 2x's would be about 2" higher. And yes 79-88 are the same. Report to moderator Logged Full hydro, 186:1 with an auto and 44's what could go wrong?? kneedownnate Trade Count: (+1) Gold Turtle Award Turtle Points: 1128 Posts: 9,757 Member since Oct '04 Re: 73-83 toyota rear springs, and 1" wheel spacers « Reply #10 on: Dec 19, 2004, 10:18:14 PM » Any idear what the spring rate difference would be? I've thought about this for a few years, but have never got a solid answer out of anybody, Nate Report to moderator Logged RIP KYOTA You can go through life being scared of the possible, or you can have a little fun and tease the inevitable. Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!