Topic: welding sliders

[Michael Wollinsky]

Which is best to us arc weld or mig or tig? I have the option of all 3

[howyadoin]

Which is best to us arc weld or mig or tig? I have the option of all 3

Mig should work great and is simple.  I definately wouldn't waste the time with tig.  Obviously, fab up some frame plates to distribute the load when welding them on.  .02

[Michael Wollinsky [OP]]

So there's no point in trying to use a arc welder

[fordh8r]

Arc welder will work just fine as long as you are comfortable in using it to achieve satisfactory welds. Just be sure to choose a good rod and make sure the rod isn't old where the rod coating could be moist. Fresh dry rod will work best. 

[Michael Wollinsky [OP]]

OK just making sure I'm better at arc welding

[_HOIST_]

x2 on whatever you can create the best quality welds with. Make sure you can trust having quite a bit of your rig's weight sitting on them if you get hung up.

[junya92toy]

Weld with the best way you can, all 3 are arc welding.