Topic: f150 springs

[bad luck]

any one have pic's of rigs with f150 springs and info on this setup 

[79coyotefrg]

here  http://board.marlincrawler.com/index.php?topic=34658.0

and here http://board.marlincrawler.com/index.php?topic=5628.msg566027#msg566027

and here  http://board.marlincrawler.com/index.php?topic=40053.0

[bad luck [OP]]

thanks  any one have any more pic's

[Bs85]

sorry but the only pic i have right now

[FIREBALL]

here are a couple of pics

[bad luck [OP]]

did you have to mod the f150 springs on your 90's runner to get that amount of lift.
can i get the specs on how you did it. im building a 90's runner 

[FIREBALL]

 used 2" add-a-leafs with longer shackles and the spring hangers are spaced down a bit. The rears are mounted into the factory trailing arm brackets with longer shackles in back too.

[FIREBALL]

Here's a link to the thread when I was selling the runner. There's a bunch of pics including the rear spring mounts. I used mid 90's springs because they have the teflon pads in the tips so the ride is a little better than the earlier ones.
http://board.marlincrawler.com/index.php?topic=21534.0;highlight=f150

[bad luck [OP]]

thanks thats what i was looking for ive seen pic's of your rig at payless4x4

[FIREBALL]

At payless? That's a surprise. I didn't think they allowed pics of Toyota's there. I think North Valley had some pics.

[bad luck [OP]]

it was on there display counter under plexy top at payless

[SloCrawler]

Nice, Im thinking of putting the F150s on my 1st gen. Will 18mm bolts work for these springs