Author Topic: Large bolt from T-case to Crossmember? (Read 911 times)

studentwheeler · « **on:** May 13, 2009, 09:51:42 PM »

In an effort to track down a wobble, I noticed that the large bolt going from the tcase mounting bracket to the crossmember looked loose; so that the bottom of the tcase is not sitting on the bushing in between the tcase and the crossmember. Is this normal? or is the large bolt supposed to be tight so that the tcase is flush with the bushing on the crossmember???

Duffil · « **Reply #1 on:** May 13, 2009, 10:01:12 PM »

your mount is worn out. the rubber droops and the bolt(mechanical interlock) droops down.

79coyotefrg · « **Reply #2 on:** May 14, 2009, 12:36:01 PM »

you need a new tcase mount

http://www.marlincrawler.com/transfer-case/parts-upgrade/crossmember-mount-hd

GJToyotabug · « **Reply #3 on:** May 14, 2009, 12:46:37 PM »

thats a better mount and deal than a stock mount

studentwheeler · « **Reply #4 on:** May 14, 2009, 10:00:58 PM »

great thanks for the info. Would my worn out mount cause a vibration at speed?

Author Topic: Large bolt from T-case to Crossmember? (Read 911 times)

studentwheeler

Large bolt from T-case to Crossmember?

Duffil

Re: Large bolt from T-case to Crossmember?

79coyotefrg

Re: Large bolt from T-case to Crossmember?

GJToyotabug

Re: Large bolt from T-case to Crossmember?

studentwheeler [OP]

Re: Large bolt from T-case to Crossmember?

Related Topics


	Author Topic: Large bolt from T-case to Crossmember? (Read 911 times) 0 Members and 1 Guest are viewing this topic. studentwheeler Rock Master Turtle Points: 121 Posts: 382 Member since Feb '06 Crawling with Marlin Large bolt from T-case to Crossmember? « on: May 13, 2009, 09:51:42 PM » In an effort to track down a wobble, I noticed that the large bolt going from the tcase mounting bracket to the crossmember looked loose; so that the bottom of the tcase is not sitting on the bushing in between the tcase and the crossmember. Is this normal? or is the large bolt supposed to be tight so that the tcase is flush with the bushing on the crossmember??? Logged Duffil lurker Gold Turtle Award Turtle Points: 138 Posts: 4,844 Member since Nov '04 Re: Large bolt from T-case to Crossmember? « Reply #1 on: May 13, 2009, 10:01:12 PM » your mount is worn out. the rubber droops and the bolt(mechanical interlock) droops down. Logged 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: Large bolt from T-case to Crossmember? « Reply #2 on: May 14, 2009, 12:36:01 PM » you need a new tcase mount http://www.marlincrawler.com/transfer-case/parts-upgrade/crossmember-mount-hd Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way GJToyotabug 4WD Legend Turtle Points: 0 Posts: 969 Member since Jan '08 The bug is deep in this one Re: Large bolt from T-case to Crossmember? « Reply #3 on: May 14, 2009, 12:46:37 PM » thats a better mount and deal than a stock mount Logged Alcan Spring http://alcanspring.com Fire Guys Racing http://fireguysracing.webs.com/ studentwheeler [OP] Rock Master Turtle Points: 121 Posts: 382 Member since Feb '06 Crawling with Marlin Re: Large bolt from T-case to Crossmember? « Reply #4 on: May 14, 2009, 10:00:58 PM » great thanks for the info. Would my worn out mount cause a vibration at speed? Logged