Author Topic: new cab (Read 561 times)

YotaJoe · « **on:** Jan 14, 2008, 03:44:59 PM »

I was told you could have a reg. cab and put on a extra cab.If it is would it be tough to do.

93tonkatoy · « **Reply #1 on:** Jan 14, 2008, 03:59:43 PM »

You can do whatever you can dream, but, you will have to move the frame brackets for the rear of the cab, remove the front bed mount brackets, and check for clearance with the fuel tank/lines. Actually, if you can weld and grind, and measure, you could do it fairly easily.


	Author Topic: new cab (Read 561 times) 0 Members and 1 Guest are viewing this topic. YotaJoe Rock Crawl'n Turtle Points: 1 Posts: 34 Member since Sep '06 new cab « on: Jan 14, 2008, 03:44:59 PM » I was told you could have a reg. cab and put on a extra cab.If it is would it be tough to do. Logged 93tonkatoy Crawler Guru Turtle Points: 5 Posts: 463 Member since Jul '07 drive it till it breaks! then break out the tools. Re: new cab « Reply #1 on: Jan 14, 2008, 03:59:43 PM » You can do whatever you can dream, but, you will have to move the frame brackets for the rear of the cab, remove the front bed mount brackets, and check for clearance with the fuel tank/lines. Actually, if you can weld and grind, and measure, you could do it fairly easily. Logged It ain't worth doin' if you don't have to clean up afterwards! Build it, break it, fix it, repeat until your wallet is empty. I shall infuse thy Jeep with the Essence of Toyota...and maybe that one won't pee on itself at the first sight of granite. - Duffil SAVE TELLICO post 491

YotaJoe

new cab

93tonkatoy

Re: new cab