Author Topic: Cheap Bumpstops? (Read 3443 times)

Yota Tony · « **on:** May 18, 2007, 09:03:59 AM »

Looking for some ideas for making cheap extended bump stops for my 82.

On my Jeep I used some longer bolts and washers to extend the rear bumps and some hockey pucks in the front coil buckets.

Any cheap ways like this for Toyotas?

Rockcrawlintoy · « **Reply #1 on:** May 18, 2007, 09:10:26 AM »

they had some cool ones posted on pirate but the board is down right now

Drew

Rockdiver · « **Reply #2 on:** May 18, 2007, 09:18:40 AM »

I used ones from a Chevy lift and put them on the frame pad 1 bolt and nut Four wheel parts had a bucket of un used ones that never got put on

85RUNR · « **Reply #3 on:** May 26, 2007, 09:11:58 AM »

I used the stock rear bumpstops on the front. I just welded them to some 2x2 tubing and then to the u-bolt plates. I don't have rear bumpstops.

Rockcrawlintoy · « **Reply #4 on:** May 26, 2007, 10:13:33 AM »

http://www.timbren.com/aeon-rubber-springs.htm check those out here is the link from pirate

http://www.pirate4x4.com/forum/showthread.php?t=347598&highlight=bumpstops

yotaboy79 · « **Reply #5 on:** May 26, 2007, 12:22:43 PM »

shocks thats what i use lol

Author Topic: Cheap Bumpstops? (Read 3443 times)

Yota Tony

Cheap Bumpstops?

Rockcrawlintoy

Re: Cheap Bumpstops?

Rockdiver

Re: Cheap Bumpstops?

85RUNR

Re: Cheap Bumpstops?

Rockcrawlintoy

Re: Cheap Bumpstops?

yotaboy79

Re: Cheap Bumpstops?

Related Topics


	Author Topic: Cheap Bumpstops? (Read 3443 times) 0 Members and 1 Guest are viewing this topic. Yota Tony Rock Master Turtle Points: 0 Posts: 274 Member since Feb '07 Cheap Bumpstops? « on: May 18, 2007, 09:03:59 AM » Looking for some ideas for making cheap extended bump stops for my 82. On my Jeep I used some longer bolts and washers to extend the rear bumps and some hockey pucks in the front coil buckets. Any cheap ways like this for Toyotas? Logged Anthony Looking For 82-83 Hilux - Must Be 5spd, able to run and drive, Square headlights and no rust! 82 Build - http://board.marlincrawler.com/index.php?topic=31283 - Dead Rockcrawlintoy 4 doors for more whores The 2K Group Turtle Points: 2147 Posts: 2,339 Member since Dec '03 RIP Kyle Re: Cheap Bumpstops? « Reply #1 on: May 18, 2007, 09:10:26 AM » they had some cool ones posted on pirate but the board is down right now Drew Logged Resident Jeep Guy 2007 JKU All Stock ECV 7-11 Rockdiver Crawler Guru Turtle Points: -118 Posts: 671 Member since Apr '04 Crawling with Marlin Re: Cheap Bumpstops? « Reply #2 on: May 18, 2007, 09:18:40 AM » I used ones from a Chevy lift and put them on the frame pad 1 bolt and nut Four wheel parts had a bucket of un used ones that never got put on 100_0007.jpg (94.62 kB, 1080x810 - viewed 2648 times.) Logged 85RUNR Rock Crawl'n Turtle Points: 0 Posts: 22 Member since May '07 Re: Cheap Bumpstops? « Reply #3 on: May 26, 2007, 09:11:58 AM » I used the stock rear bumpstops on the front. I just welded them to some 2x2 tubing and then to the u-bolt plates. I don't have rear bumpstops. Logged Rockcrawlintoy 4 doors for more whores The 2K Group Turtle Points: 2147 Posts: 2,339 Member since Dec '03 RIP Kyle Re: Cheap Bumpstops? « Reply #4 on: May 26, 2007, 10:13:33 AM » http://www.timbren.com/aeon-rubber-springs.htm check those out here is the link from pirate http://www.pirate4x4.com/forum/showthread.php?t=347598&highlight=bumpstops Logged Resident Jeep Guy 2007 JKU All Stock ECV 7-11 yotaboy79 stuck in the shop The 2.5K Group Turtle Points: -19 Posts: 2,838 Member since Aug '03 Re: Cheap Bumpstops? « Reply #5 on: May 26, 2007, 12:22:43 PM » shocks thats what i use lol Logged the old build http://board.marlincrawler.com/index.php?topic=7758.0 the new build http://board.marlincrawler.com/index.php?topic=57776.0