Author Topic: 22RE Intake Installation Question (Read 2189 times)

CTENG in KS · « **on:** May 11, 2006, 07:52:22 PM »

On the underside of the intake runners there is a flanged hardline, part of the coolant system. Is there an O-ring or seal that is supposed to go on it?

olemisstoy88 · « **Reply #1 on:** May 12, 2006, 12:34:43 AM »

got a pict?

CTENG in KS · « **Reply #2 on:** May 12, 2006, 07:16:07 AM »

Nope...can't get to it with camera...was hoping someone who has done it lately remembers.

BUBBA · « **Reply #3 on:** May 12, 2006, 07:38:38 AM »

if memory serves me correctly (which it hardley ever does),I think that has an o-ring on it.It's been a few years since I took one apart so don't quote me on that.

CTENG in KS · « **Reply #4 on:** May 12, 2006, 07:49:03 AM »

I better start looking through the gasket set...see if I got a replacement, cause I think the original fell out sometime during dissassembly.

Phazertwo · « **Reply #5 on:** May 12, 2006, 01:50:32 PM »

when I built my 85 22re, i couldn't find a gasket that fit it. I simlply RTV the crap out of it... life is good

PZ

CTENG in KS · « **Reply #6 on:** May 12, 2006, 07:29:05 PM »

Yeah, I don't really see anything in the gasket set that would fit. I am gonna have a look around again tomorrow, but I think the plan is gonna be to "RTV the crap out of it."

kyle_22r · « **Reply #7 on:** May 13, 2006, 11:11:30 AM »

if i remember correctly it's sort of a compression fit. don't think mine had a gasket either, and i didn't use one when i put it back together. no leaks.

benmlee · « **Reply #8 on:** May 13, 2006, 09:46:04 PM »

That is the pipe for cabin heater. There is definitely an o-ring there. The part number is: 96711-24017.

BoG-ToY · « **Reply #9 on:** May 13, 2006, 10:26:17 PM »

there was an o-ring that fit in my kit.......uh, well, but youve got bigger fish to fry at the moment

Author Topic: 22RE Intake Installation Question (Read 2189 times)

CTENG in KS

22RE Intake Installation Question

olemisstoy88

Re: 22RE Intake Installation Question

CTENG in KS [OP]

Re: 22RE Intake Installation Question

BUBBA

Re: 22RE Intake Installation Question

CTENG in KS [OP]

Re: 22RE Intake Installation Question

Phazertwo

Re: 22RE Intake Installation Question

CTENG in KS [OP]

Re: 22RE Intake Installation Question

kyle_22r

Re: 22RE Intake Installation Question

benmlee

Re: 22RE Intake Installation Question

BoG-ToY

Re: 22RE Intake Installation Question

Related Topics


	Author Topic: 22RE Intake Installation Question (Read 2189 times) 0 Members and 1 Guest are viewing this topic. CTENG in KS Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great 22RE Intake Installation Question « on: May 11, 2006, 07:52:22 PM » On the underside of the intake runners there is a flanged hardline, part of the coolant system. Is there an O-ring or seal that is supposed to go on it? Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 olemisstoy88 Crawler Guru Turtle Points: -381 Posts: 521 Member since Dec '05 Re: 22RE Intake Installation Question « Reply #1 on: May 12, 2006, 12:34:43 AM » got a pict? Logged 88. 4x2 Total chaos 6.5" caddy uniball kit Racerunner 2.5 x 14" coilovers on front, 62" deavers, fabbed engine/shock cage, bed cage, roll cage and great frame, complete int., (5) 5x4.5 outlaw II w/235 buckshots <----- parting out! make offer '84 4x4 . 5 speed 22r 3.5" lift 33x10.5s bfg MTs Hannamann Glass frontcap, 32/36weber, LCE swirlie plate, Magnaflow, "Im madder than Toby Keith at a Dixie Chicks concert" CTENG in KS [OP] Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: 22RE Intake Installation Question « Reply #2 on: May 12, 2006, 07:16:07 AM » Nope...can't get to it with camera...was hoping someone who has done it lately remembers. Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 BUBBA The 1K Club Turtle Points: 16 Posts: 1,138 Member since Mar '05 this sucks Re: 22RE Intake Installation Question « Reply #3 on: May 12, 2006, 07:38:38 AM » if memory serves me correctly (which it hardley ever does),I think that has an o-ring on it.It's been a few years since I took one apart so don't quote me on that. Logged 87 4runner 350 with custom dent package. My budget beater CTENG in KS [OP] Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: 22RE Intake Installation Question « Reply #4 on: May 12, 2006, 07:49:03 AM » I better start looking through the gasket set...see if I got a replacement, cause I think the original fell out sometime during dissassembly. Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 Phazertwo 4WD Legend Turtle Points: 8 Posts: 812 Member since Aug '05 So many yoda's, so little time! Re: 22RE Intake Installation Question « Reply #5 on: May 12, 2006, 01:50:32 PM » when I built my 85 22re, i couldn't find a gasket that fit it. I simlply RTV the crap out of it... life is good PZ Logged 92 xtra cab, with some stuff... Quote from: yotabj on Oct 30, 2006, 10:01:02 AM ...why buy when you can build? CTENG in KS [OP] Gold Turtle Award Turtle Points: -501 Posts: 4,295 Member since Jun '04 ^Alfred the Great Re: 22RE Intake Installation Question « Reply #6 on: May 12, 2006, 07:29:05 PM » Yeah, I don't really see anything in the gasket set that would fit. I am gonna have a look around again tomorrow, but I think the plan is gonna be to "RTV the crap out of it." Logged IFS is best kept at ambient temperature in a pile of scrap in the backyard. When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability. -reklund5 4Runner: http://board.marlincrawler.com/index.php?topic=4580.0 Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0 kyle_22r The 1K Club Turtle Points: 530 Posts: 1,233 Member since Dec '03 yellow beast Re: 22RE Intake Installation Question « Reply #7 on: May 13, 2006, 11:11:30 AM » if i remember correctly it's sort of a compression fit. don't think mine had a gasket either, and i didn't use one when i put it back together. no leaks. Logged benmlee Dusty Trails Turtle Points: 0 Posts: 3 Member since Feb '06 Crawling with Marlin Re: 22RE Intake Installation Question « Reply #8 on: May 13, 2006, 09:46:04 PM » That is the pipe for cabin heater. There is definitely an o-ring there. The part number is: 96711-24017. Logged BoG-ToY The 2K Group Turtle Points: 594 Posts: 2,122 Member since Dec '05 Re: 22RE Intake Installation Question « Reply #9 on: May 13, 2006, 10:26:17 PM » there was an o-ring that fit in my kit.......uh, well, but youve got bigger fish to fry at the moment Logged Sand, what fun, drop pressure to 12psi, stock tires are still digging, can't afford to get stuck, 8psi, still not working. Find a place to GET OUT, air up, un-lock hubs, WAIT whats this, hubs are UN-LOCKED already. 2wd, 8psi, stock tires, Oregon sand dunes.