Author Topic: need some help (Read 759 times)

yodaboy4life · « **on:** May 04, 2006, 09:22:50 AM »

sorry if this has all ready covered but why would it be that my right front is sagging down?

i don't know if it is the road I'm on or what because our roads have a good slant to it but it is sagging about an inch i need help

79coyotefrg · « **Reply #1 on:** May 04, 2006, 10:12:16 AM »

your right spring is bent or had a cracked leaf

where you at ??

yodaboy4life · « **Reply #2 on:** May 04, 2006, 10:43:48 PM »

what do u mean where am i at im oregon?

79coyotefrg · « **Reply #3 on:** May 05, 2006, 07:42:02 AM »

i ask where you are so i know who is in your area that might can help you out

you will need to get a set of F150 springs and take them apart so you can use the individual leafs, then take your springs off your truck and replace the bad leafs with one as close to the right length as the bad one, you could also include a couple of those leafs on both sides to increase your lift

Author Topic: need some help (Read 759 times)

yodaboy4life

need some help

79coyotefrg

Re: need some help

yodaboy4life [OP]

Re: need some help

79coyotefrg

Re: need some help


	Author Topic: need some help (Read 759 times) 0 Members and 2 Guests are viewing this topic. yodaboy4life Rock Crawl'n Turtle Points: 0 Posts: 109 Member since Mar '06 need some help « on: May 04, 2006, 09:22:50 AM » sorry if this has all ready covered but why would it be that my right front is sagging down? i don't know if it is the road I'm on or what because our roads have a good slant to it but it is sagging about an inch i need help Logged give me some duct tape some zip ties a welder and a tourch and ill do some tinkerin 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: need some help « Reply #1 on: May 04, 2006, 10:12:16 AM » your right spring is bent or had a cracked leaf where you at ?? Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way yodaboy4life [OP] Rock Crawl'n Turtle Points: 0 Posts: 109 Member since Mar '06 Re: need some help « Reply #2 on: May 04, 2006, 10:43:48 PM » what do u mean where am i at im oregon? Logged give me some duct tape some zip ties a welder and a tourch and ill do some tinkerin 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: need some help « Reply #3 on: May 05, 2006, 07:42:02 AM » i ask where you are so i know who is in your area that might can help you out you will need to get a set of F150 springs and take them apart so you can use the individual leafs, then take your springs off your truck and replace the bad leafs with one as close to the right length as the bad one, you could also include a couple of those leafs on both sides to increase your lift Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way