Topic: 3rd members

[GoaT]

i would like some good shape-new 3rd members. with 5.29 gears installed and i would like a quick lock set up but ok if not... im just more interested in set up gears to get my toy on the road since im running some 35s on my rig.. let me know what yall have..

this is for a 4cyl 8" axle.. in TX

[Willy Mammoth]

I have a new set of 5.29's that is on a welded carrier.

I just installed them to test out the low pinion in the rear.

They have no more than 150 miles on them.

I am going to go with the V6 trird if I can find them.

You can put any carrier you want in it and only have to set backlash.

As is $200.00 plus shipping.

[GoaT [OP]]

is this ontly one 3rd member? am am i correct in saying that this will work for front of rear?

[Willy Mammoth]

Yes I have only one and it will fit front or rear, but I wouldn't run a welded diff in the front.

I also have 5.29 high pinion diff's that could be used in the front if you had lots of lift and needed to correct driveshaft angle, but these are pricey.

$500 with gears and no carrier or $1250 with a ARB air locker. These are gone


I also have some 4cyl housings and open carriers with no gear sets.

[GoaT [OP]]

PM sent

[GoaT [OP]]

bump i will need one more.. at least a set of gears for really cheap... 5.29s

[Off Kilter]

Willy,

I have a V6 rear all stock in the Sacramento area.  Let me know if your intrested.  It's a complete axle, but I have some one who wants the shafts out of it.  If your intrested in just the third I may be able to split it up.

[Willy Mammoth]

Willy,

I have a V6 rear all stock in the Sacramento area. Let me know if your intrested. It's a complete axle, but I have some one who wants the shafts out of it. If your intrested in just the third I may be able to split it up.

I would like to pick that up, but the shipping from CA to FL for the axle housing and 3rd would cost too much.

Thanks

[scyota]

Willy,

I have a V6 rear all stock in the Sacramento area. Let me know if your intrested. It's a complete axle, but I have some one who wants the shafts out of it. If your intrested in just the third I may be able to split it up.

how much for the axle and third without the shafts?

[Off Kilter]

100 for the third and housing, $150.00 for the whole thing.