0 Members and 3 Guests are viewing this topic.
I am in the same boat, but with my blinkers. Haven't delved into it yet but my first try will be led resistors. The resistor is the cheaper fix but if that doesn't work for you, you may have to do a harness like this.http://www.lowrangeoffroad.com/off-road-builder-parts/lights-electrical-switches/h4-headlight-relay-upgrade-wiring-harness-diy-h4hlrh.html
After reading the description on this, sounds like this would fix John Doe's issue.
just read over the whole build againreinspired
what side are you running the exhaust? Any pictures?Back from the dead.......After working out many little annoying issues I finally got my sticker1 of my issues was an exhaust leak between the cat and rear O2 that prevented the Cat monitor from picking up, which was required by the Referee.Now that my Engine swap has been approved I can get to work on my long laundry list of other projects that have been put on hold. I will be slowly working on some post worthy and some not so post worthy projects as time permits. As I make progress I will make sure to post up and share with all who are interested.
question for ya- Im slipping an FJ80 axle under an IFS mini. When you used the Ruffstuff fj60 front perches, did you have to rotate the knuckles? Im trying to just cut off IFS, slap some springs under it, weld on some perches, and go! (with FROR hysteer)
Back from the dead indeed!!!! A brief update.....Last summer I installed my 4Wheel underground 3 link in the front
Started by wrenchtech Toyota Pickup/4Runner Tech 1979-95
Started by mmessier2 Toyota Pickup/4Runner Tech 1979-95
Started by kneedownnate Craigslist, eBay, & other Auctions
Started by x91crawlerx Craigslist, eBay, & other Auctions
Started by 87yotachad New Member Check-In!