Topic: Need ifs lift

[Thumper]

Hey guys need an ifs yota lift too go on my 92 runner the front will work if u dont got the back but if anyone has some lift coils out there i could use them too.
Thanks
adam

[86 4runner]

i have one 4 inch trailmaster practically new

[toysfreak]

I need an ifs lift too,  if it is still available             toytruckfreak@yahoo.com

[dj]

Thought I would put you at the top

[brokentoy]

i have a 4in lift out of an 86 if that will work

[yotamckimboy4x4]

how much do you want for the lift?

[brokentoy]

paid 600 a year ago make offer its only a front set up the back were just blocks

[yotamckimboy4x4]

its only a front set up the back were just blocks?
so you just put 4 in blocks in the rear? does that make it ride ruffer or wat?

[brokentoy]

they were 3" blocks the ride if close to stock, truck flexs the same as stock

[justcuz]

You can add leafs to the rear and add a inch or two. Remember when you add blocks you are increasing the torque effect on the springs and will increase wrap up under applied throttle conditions. Axle hop leads to all kinds of carnage. Avoid lift blocks when you can1

[Blk Widow]

I got pro comp 4 inches lift from my 91 toy and theres some missing hardware which that I need for my SAS.. PM me and U will get very good deal!!

[dj]

You can add leafs to the rear and add a inch or two. Remember when you add blocks you are increasing the torque effect on the springs and will increase wrap up under applied throttle conditions. Axle hop leads to all kinds of carnage. Avoid lift blocks when you can1

He is puttin it on a 93 runner, it has coil rear so it don't matter. He is working long hours, he will get back on here sooner or later

[justcuz]

Sorry, my bad. I thought the 4Runner went to a 4 door with coil rear springs in 94. My brother in law has had a couple of them, I just did not keep track of the years well.