Author Topic: parting out: '86 toy turbo 4x4, '90 toy 4x4, '89 toy 2wd (Read 3049 times)

tryn2Crawl · « **on:** Jan 15, 2006, 09:57:24 PM »

'86 TURBBO-not much of a looker at all. Minor parts here and there available. Everthing in the engine bay is there. engine needs to be rebuild and needs a new turbo. Minor interior parts available(Blue).Turbo Rear end available. I'm keeping the tranny, so don't ask. frame is good.
'90 toy - its a 4x4 reg. cab. Cab is fair and frame is good, rear end available. Minor interior parts and engine bay components available also.Engine froze.tranny is a available( Forward shift). Doos are good for half doors.Glass are good.
'89 toy 2wd- Everthing in the engine bay is there( Except the Engine). 2wd tranny available( around 120k on it).Minor interior parts are also available. Has front end radiator support damage.Cab section is good and frame is good.
Let me know what you are looking for and I'lll have my brother check it out if it's still there since it's laying out in his back yard.Some parts will be confirmed for availablility.
PM me for parts and pricing. All parts located in Wilton, south of Sacramento, north of Lodi.

lilbuddy · « **Reply #1 on:** Jan 15, 2006, 11:20:22 PM »

EFI Fuel Tank and Pump? Price?

ToYocRawleR · « **Reply #2 on:** Jan 16, 2006, 03:17:58 PM »

How much for left and right fenders off the 90 if you have em? thanks

olemisstoy88 · « **Reply #3 on:** Jan 16, 2006, 03:33:35 PM »

what color are the interiors?

tj40ounce · « **Reply #4 on:** Jan 16, 2006, 03:35:07 PM »

front drive line w/cv??

sjc81toy · « **Reply #5 on:** Jan 16, 2006, 05:01:32 PM »

Either third gen have useable fenders/hood? Where? How much?
-Steve C.

tryn2Crawl · « **Reply #6 on:** Jan 17, 2006, 08:45:56 PM »

all parts located in Wilton, south of Sacramento...... interiors areBLUE on the 3rd gen 4x4, GREY on the 3rd gen 2wd and Blue on the 2nd gen 4x4. I'd have to check on the hoods to be sure. Pass. side fender on the 3rd gen 4x4 is good and both on the 3rd gen 2wd are good. Fuel tank with pump- $100. Feel free to come and check the trucks out and make an offer then on any parts.
PM me and I'll PM you back with my brother's number to see when he will be available to show it to you cause it's at his home in Wilton.Thanks.

robrub00 · « **Reply #7 on:** Jan 17, 2006, 10:57:06 PM »

how much for the thortlleboby and intke plenum off the 90?also the throttle cable and the Shot piece of rubber on the throttle body? also wanta sell the tcaes of the turbo?

? I know your keeping the tranny just thought I would ask. thanks

Defi · « **Reply #8 on:** Jan 18, 2006, 06:16:03 PM »

What about an IFS Box

olemisstoy88 · « **Reply #9 on:** Jan 19, 2006, 11:39:14 AM »

I have an 88 LWB and I need minor parts like linkages, lines, and clucth boot, stuff for a 5speed swap. Have cash in hand.

dla99pet · « **Reply #10 on:** Jan 22, 2006, 12:51:25 PM »

I need to know if you have the wiring harnes for a 1989 toyota 4x4. Or if you know someone who does

tryn2Crawl · « **Reply #11 on:** Jan 22, 2006, 07:30:06 PM »

the 4wd harness is gone.Only the 2wd is still there.

tryn2Crawl · « **Reply #12 on:** Jan 22, 2006, 07:36:55 PM »

Ones off mines are non-powersteering except for the one off the Turbo.Would like to get rid of the Whole complete set up( Pump, lines,fill tank, and Gear box).But my brother got one already off and sitting around on the shelf. Shoot me an offer on that and I'll ask him. Better if you pm me about it.Just remind me what the offer is for.Thanks.

hellbent · « **Reply #13 on:** Jan 22, 2006, 08:49:44 PM »

Do you have the doors off the turbo and what kind of shape are they inand what color?

kneedownnate · « **Reply #14 on:** Jan 22, 2006, 09:28:17 PM »

Thanks for reminding me! Do you have a straight, no bondo and no rust, door off the 89 reg cab? And if so what color? I don't need the guts either.

tryn2Crawl · « **Reply #15 on:** Jan 22, 2006, 09:28:53 PM »

Good for Half doors only.Not a real looker at all.

kneedownnate · « **Reply #16 on:** Jan 22, 2006, 10:38:49 PM »

snap $I\'m Down$

tryn2Crawl · « **Reply #17 on:** Jan 22, 2006, 11:33:42 PM »

That reply was for the other guy on the 2nd gen doors................................ I'll have to check about the doors on the '89 truck.I believe that they are still good. I can get back to you on that tommorrow.

kvn85 · « **Reply #18 on:** Jan 23, 2006, 08:21:24 PM »

Do you have the dome light cover? If so how much?

kneedownnate · « **Reply #19 on:** Jan 23, 2006, 10:25:05 PM »

Not to steal a sale, but those dome light covers are dirt cheap from the dealer.

olemisstoy88 · « **Reply #20 on:** Jan 24, 2006, 12:42:00 AM »

Hey I need the shifter stick assembly for 5 speed. shipping to 38655 please.

olemisstoy88 · « **Reply #21 on:** Jan 24, 2006, 12:43:30 AM »

and clutch boot, too please

ToYocRawleR · « **Reply #22 on:** Jan 24, 2006, 06:48:58 PM »

Do you have the driver side taillight assembly of the 90?

VReal · « **Reply #23 on:** Jan 25, 2006, 06:13:21 AM »

Do you have a good working brake booster off of the 90 4X4?

johnnygalt · « **Reply #24 on:** Jan 25, 2006, 01:09:07 PM »

On the 90, how about the front passenger side marker light, the one that mounts in the fender?

Does the 90 have a power antenna?

olemisstoy88 · « **Reply #25 on:** Jan 25, 2006, 09:27:36 PM »

Hey I need the shifter stick assembly for 5 speed. shipping to 38655 please.

tryn2Crawl [OP]

tryn2Crawl [OP]

tryn2Crawl [OP]

tryn2Crawl [OP]

tryn2Crawl [OP]

Related Topics