Author Topic: want to see your square tube rock sliders (Read 13894 times)

Skinny_Pedal · « **on:** Aug 25, 2005, 10:26:25 PM »

just want to see what you guys have done with your sqaure tube rock sliders. possibly with a 2" body lift. want to make a set for my 85 before heading out to bumb f*ck egypt next month

*FFC* · « **Reply #1 on:** Aug 25, 2005, 10:34:04 PM »

Come saturday I'll have some pics, I'm puttin some 2x2 to 2x3 sliders on my truck saturday afternoon...I'll post em when I get em

Skinny_Pedal · « **Reply #2 on:** Aug 25, 2005, 10:44:21 PM »

let me back up a second. a toyotas only please

mr4x42u · « **Reply #3 on:** Aug 25, 2005, 11:49:39 PM »

here are some of chads...I like his,,low profile and mounted right to the body..

To The Floor · « **Reply #4 on:** Aug 26, 2005, 12:10:32 AM »

WT before you even thinkin about hitting that post button, we already know what your booty fab square tube sliders look like with that custom kick out. dont do it trash!

*FFC* · « **Reply #5 on:** Aug 26, 2005, 06:59:44 AM »

Quote from: Skinny_Pedal on Aug 25, 2005, 10:44:21 PM

let me back up a second. a toyotas only please

um..... ok $Beer Chug\'n$

MiniSimp · « **Reply #6 on:** Aug 26, 2005, 07:16:22 AM »

2"x2"x0.25"x60"
Angle at the frame for the front mount is 14 degrees.
Sliders are 0.50" above the bottom of the chassis.
Notches made in the pinch weld for the 3 mounts.

WHITE_TRASH · « **Reply #7 on:** Aug 26, 2005, 07:33:17 AM »

Bootyfab? hell thats one thin on my junk that ISNT booty fabbed.... And the "custom" kickout was on there when I got the steel I had nothing to do with it other than cutting it the way I did so its usefull.

FIREBALL · « **Reply #8 on:** Aug 26, 2005, 07:36:08 AM »

Here are some pics of mine. 3X5 turned on an angle, then cut the top corner off to make it flat. Plated it with some diamond plate so i've got something to stand on to get to the roof or in deep water, etc. Used inner and outer hitch reciever material to mount them. Large side on the frame, then slid the nerfs with the small side into them. I was going to use bolts, but got lazy, so I put a couple of short beads on each mount. Now if I need to take them off, I just have to grind a few short welds and they'll slide rite out.

supermat · « **Reply #9 on:** Aug 26, 2005, 10:59:38 AM »

3x5 is bigger than anything I'd ever want but your mounting method is ingenius! I never would have though of that.

I'm really impressed man.

raybie · « **Reply #10 on:** Aug 26, 2005, 12:16:37 PM »

2x4x.180

raybie · « **Reply #11 on:** Aug 26, 2005, 12:20:44 PM »

2x4x.180 and I believe the green truck is 2x2x?

robinhood4x4 · « **Reply #12 on:** Aug 26, 2005, 01:19:54 PM »

My sliders here: http://robinhood4x4.com/rocksliders.htm

biteme · « **Reply #13 on:** Aug 26, 2005, 03:12:26 PM »

pics of a friends

biteme · « **Reply #14 on:** Aug 26, 2005, 03:20:36 PM »

heres more off the truck

biteme · « **Reply #15 on:** Aug 26, 2005, 03:25:00 PM »

there for sale and there located in Wa.

Brandon · « **Reply #16 on:** Aug 26, 2005, 03:58:08 PM »

http://www.off-road.com/toyota/reviews/jsm-nerfs/

Marketing · « **Reply #17 on:** Aug 27, 2005, 09:40:56 PM »

We have 58" sliders NOW ON SALE for short bed pickups and 4Runners for just $99 ...

Skinny_Pedal · « **Reply #18 on:** Aug 27, 2005, 10:07:49 PM »

Chris you keep breakin my balls here. i got a long bed. put your longbed ones on sale and ill let you charge my card again

but seriouly hook a brotha up with the longbed sliders

Marketing · « **Reply #19 on:** Aug 27, 2005, 11:00:55 PM »

I got a huge deal on these because we made so many of them, but we only made the 58's. The longer bars are made in lots of 10 at time. We just don't have the demand on the longer ones to get the price down like we can with the 58's.

Snowtoy · « **Reply #20 on:** Aug 28, 2005, 01:14:26 AM »

Here are mine, I used 2x2x3/32. The sliders mount 4 places on the frame. For the mounts I used smaller tube welded to 3/8's angle iron. The mounts are welded to the frame, the sliders slide onto the mounts and secured with bolts.

yotaboy79 · « **Reply #21 on:** Aug 28, 2005, 03:07:47 PM »

heres the square tube ones i used to have they where 2x2x.120 if i did another set of square tubers i would use 1 3/4 square tube but i wound up makeing new ones out of 1 1/2 .120 round tube heres the pics of my old square ones your welcome to take them if ya want them they have been tortched off so new mounts will be needed

Ramrod · « **Reply #22 on:** Aug 28, 2005, 03:40:46 PM »

I used some 2x2x3/16 60" long with 45 degree cuts at the end and then mounted them angled. They look really clean and slide along the rocks way better than my friends that have theirs flat. Make sure u make them out of at least 3/16 and u should plate your frame where you weld it one because mine tweeked the frame and they bent up a little. I go take some pics now.

Ramrod · « **Reply #23 on:** Aug 28, 2005, 03:47:33 PM »

here they are notice what happens when you don't have them on

Hyena · « **Reply #24 on:** Aug 29, 2005, 03:26:15 PM »

Here are mine. 2x2x.120 wall. Mounted in 4 spots per side with 2x2x.120 wall, mounted in 1 spot per side with 2x4x.250 wall. 45'ed the ends and capped them. I notched the lip on the bottom of the cab so the sliders would sit up a little higher.

Hyena · « **Reply #25 on:** Aug 29, 2005, 03:27:35 PM »

1 more

Hyena · « **Reply #26 on:** Aug 29, 2005, 03:29:07 PM »

Ramrod · « **Reply #27 on:** Aug 29, 2005, 04:05:50 PM »

I notched mine too

raybie · « **Reply #28 on:** Aug 29, 2005, 05:05:30 PM »

mine "noched" themselves

Brandon · « **Reply #29 on:** Aug 30, 2005, 10:37:20 AM »

Quote from: Chris Geiger on Aug 27, 2005, 11:00:55 PM

I got a huge deal on these because we made so many of them, but we only made the 58's. The longer bars are made in lots of 10 at time. We just don't have the demand on the longer ones to get the price down like we can with the 58's.

hmm, that is a killer deal - I don't see why they wouldn't work on my ZJ and it needs some. I'll take some measurements - of course I know you guys don't want your stuff going on a JEEP LOL

Skinny_Pedal [OP]

Skinny_Pedal [OP]

Related Topics