Author Topic: L52?? (Read 875 times)

chevyLUVtoyota · « **on:** Apr 26, 2005, 08:55:32 AM »

hey is there a tranny that i can put in that is the same size as the L52 in my 83??

Jared · « **Reply #1 on:** Apr 26, 2005, 09:08:41 AM »

you can use just about any tranny from a 4wd but if you use a diff tranny with diff lengths you will need to relocate your shifter holes, drivelines and crossmember mounts.... if you want a tranny with the same length i think the l 43 4 speed and the l50 5 speed will work but why step down... the l52 is the best out of all of them... oh wait i forgot the L52 HD is the best but its $$$$$$$ but $$ well spent....

Marlin · « **Reply #2 on:** Apr 26, 2005, 09:35:13 PM »

All '79 to '83 trans are 21.5" and the '83 L52 is the best of the early trans. [Jared was right again.]

'84 and newer trans are 25" long.

The L52H/D trans that I build would be your best bet.

chevyLUVtoyota · « **Reply #3 on:** Apr 26, 2005, 11:10:08 PM »

haw much is sumthing like that??? my tranny is sloppy

derek · « **Reply #4 on:** Apr 27, 2005, 06:34:32 AM »

http://www.marlincrawler.com/trans.html

Author Topic: L52?? (Read 875 times)

chevyLUVtoyota

L52??

Jared

Re: L52??

Marlin

Re: L52??

chevyLUVtoyota [OP]

Re: L52??

derek

Re: L52??


	Author Topic: L52?? (Read 875 times) 0 Members and 1 Guest are viewing this topic. chevyLUVtoyota Crawler Guru Turtle Points: 60 Posts: 489 Member since Mar '05 Crawling with Marlin L52?? « on: Apr 26, 2005, 08:55:32 AM » hey is there a tranny that i can put in that is the same size as the L52 in my 83?? Logged Jared 4WD Legend Turtle Points: 170 Posts: 879 Member since Dec '03 Rolled baby.... IN front of my house.... Re: L52?? « Reply #1 on: Apr 26, 2005, 09:08:41 AM » you can use just about any tranny from a 4wd but if you use a diff tranny with diff lengths you will need to relocate your shifter holes, drivelines and crossmember mounts.... if you want a tranny with the same length i think the l 43 4 speed and the l50 5 speed will work but why step down... the l52 is the best out of all of them... oh wait i forgot the L52 HD is the best but its $$$$$$$ but $$ well spent.... Logged ah the beauty of a cuttin torch Marlin Inspirational Genius 4WD Legend Turtle Points: 138 Posts: 856 Member since Sep '02 MC³ = 1,148:1 Re: L52?? « Reply #2 on: Apr 26, 2005, 09:35:13 PM » All '79 to '83 trans are 21.5" and the '83 L52 is the best of the early trans. [Jared was right again.] '84 and newer trans are 25" long. The L52H/D trans that I build would be your best bet. Logged 1980 Toyota - 1997 3RZ-FE 2.7l Engine, Turbo R151F 4.31:1, Triple Turbo Marlin Crawler Billet (2.28x4.70x4.70) = 1,148:1 Crawl Ratio, Marlin Crawler Twin Stick and Short Throw Shift Kits, 30mm H/D Output Shaft, High Angle Drive Lines, 5.29:1, ARBs, High Pinion Front, 25mm HD Billet High Steer Kit, 6 Pin Locking Hub Bodies, 86+ Wide Rear End, V6 3rd member, Chromolly Axles all around, 37" IROKs with Beadlocks, York onboard air - Rollbar air tank, Premier Power Welder, Marlin Crawler 4" USA-made Leaf Springs, Bilstein Shocks, et cetera.... chevyLUVtoyota [OP] Crawler Guru Turtle Points: 60 Posts: 489 Member since Mar '05 Crawling with Marlin Re: L52?? « Reply #3 on: Apr 26, 2005, 11:10:08 PM » haw much is sumthing like that??? my tranny is sloppy Logged derek Crawler Guru Turtle Points: -61 Posts: 600 Member since May '02 slow truck=more time to nap Re: L52?? « Reply #4 on: Apr 27, 2005, 06:34:32 AM » http://www.marlincrawler.com/trans.html Logged rocknroll4x4