Thanks for the help.
I tried searching but did to answer my question.
I wanted mc f/r leafs but em are no longer avail. so I'mma change route to allpro. I did some reading but did not specify if it applies to truck (mainly regarding runners). Do I have to adjust for the weight differences just like runners with heavier rear end such as hardtop, glass, etc. such as using 4 inch leaf for the front and 5 inch leaf for the rear, does this apply to first gen p/u also?
Spoke to some local owners and a few of the stated that they much prefer using all around 5 inch leaf then having them off set.
What is best from you all experts besides using ruf and f150s.
Thanks for any input.
NO you don't need to run a different size spring up front, thats only for 4runners. UNLESS you have like a utility bed that weighs a LOT
If I was you I'd run the AllPro 4 inch springs in the front and F150's in the rear using the spring hangers from Marlin or AllPro.