I was originally going to build mine that way. I'm still learning to bend tube so I tried to minimize the amount of bends that I could screw up 
The turn signals are going away. I kinda put them on as a temp fix until I could wire in a trailer taillight converter that I bought last year (to make the red LED's blink as a tailight). Those yellow LED's are leak. They can only be seen at night. I'll just weld up the holes I drilled in the sheetmetal tailight holders. The bottom inch or 2 of the red LED's might be covered but there's 4 inches of light above so that should work out OK.
yeah- when it comes to getting tube bent im lucky enough to have a family memeber do it for me. he bends it, i get the tube and truck prepped and do the welding.
i was wondering how those lights were gonna do. the ones i have are the bulbed side marker lights from autozone. they had some red ones maybe ill try those if these suck real bad. where did you get the trailer light converter. i thought about going that way but the wife wants this to be an "as free as possible" project and i had the lights laying around for my 4wheeler trailer.
Logged
11C's. We are snipers too, just with bigger bullets.
87 4runner- 3.4L, ARB f&r, 5.29, longs, 39.5in IROKS, duals with a 4.7, body and topper bob'd 11in, way too much lift, and an extremely high credit card parts bill!
