I'd like to see a side pic of the clutch disc to see thickness, and assuming it's nice and thick you have yourself a deal
I wish that throttle body would work for the next generation efi! Was it done locally?
I will post a new pic in teh morning! It's plenty thick. I bought the throttle plate from a guy in Canada and had is CNC Milled locally. Then hand filed it to perfecton.
I could use the following if you have them. Hit me up with a price.
-Driver side bell housing stiffener(bolts to side of block, and tranny)
-A set of bell housing bolts
-Vsv valve for a/s for 22re (little green and black valve on the valve cover)
-driver side water tube that goes to the heater tube
-The 2 hooks to remove the engine with
-The clutch soft line, and mount from down by the starter(basically everything that connects from the hard line, and goes to the slave)
-Throttle cable if it's still in good shape
I may also be interested in the whole intake setup so if I could get a price with that as well that would be great.
I have it all, but the on the throttle cable had the end split. I have the rest. lets 5 a pop. 10 shipping so 40 for everything shipped. Let me know!