It should use 4 mounts to mount it on. 2 to the front crossmember and 2 to the body mount. The 2 on the body mounts are the ones that are different i think. All you need to do is cut those off and then weld them back on were you need them. Maybe 20 minutes at the most of work to do. I love my smittybuilt. I cut the bottom tubes off right after the turn signal for better ground clearance. The don't dent very easily at all (trust me, i know). We just welded a friends smittybuilt directly to his crossmember, but i wouldn't recemend (sp?) that if you want to take it off later.