Topic: Message #66582

[Marketing]

Using the specs from hendrixmotorsports, we cut the rear frame down to a length of 150". The rear crossmember is 2.5" thick, making the overall frame length 152.5".

http://www.hendrixmotorsports.com/


The rear crossmember was installed onto the back of the freshly cut frame.


You can see two sets of springs here, the stock set, our prototype 4" rear test springs.




Next the rear spring hangers were cut off and the narrow axle and springs were rolled out to the graveyard.



Using a C clamp, Andy tacked a set of rear shackle hangers under the rear crossmember






A set of 2" over stock shackles are temporally fitted in place.