ok got barney(22r) in and hooked up except for some vaccuum lines that will probably be pluged off ran fine .when we poured gas down the carb it fired right up now to address the wires from the carb i have a red wire that goes to the electric choke , a black and a white wire that goes to something on the passenger side rear of the carb and a single black wire that is running to the passenger side front of the carb.
i have a ignition hot already ran i just need to know what ones need to hook up to it and what ones need to goto ground .after almost 2 yrs it sure was nice to have fire up damn near instantly and run as long as we pour gas into it (the carb)
any help ? anyone done this before
