not a problem
1st remove your exhaust manifold, if you dont have a header this is a great time to install one,
then remove the intake manifold , i always leave the carb attached, just unhook the throttle linkage and the 4 bolts on the bottom and 4 or 5 on top, anyway move it out of the way,
now pull the power steering pump loose from the head, 3 bolts on the side and 1 on the front of the head, and remove the distributor, use a 19mm and a hammer to remove the big bolt that holds the distributor drive gear on the end of the cam
now directly under that gear is a small puddle of oil, in that puddle is a 12mm bolt head, remove that then the head bolts and your head is ready to remove