Well I have a bad ring in my 2.7 so I am re-building it to a stage 2 I have most of this planned out. My Q is this anyone know what the specs are for the exhaust and intake valves I am going to port and polish the head to accomindate 2mm oversized I am boring to .30 over and pistons are going to 10:1 and a LC Engineering stage 2 cams (I know some of you are gonna say do the v-8 swap but I already have one of those in my '85)
when you get the cams, your spec sheet will give you the specs for the cam you run,
