Got the pump in that you sent me. Works great.
Thanks a ton.
Now, when I was changing out the pump, I noticed my motor was leaning a bit to the passenger side (3rz from a 2000 taco in place of the 1985 22re....I bought the truck with the swap already done)
It appears that the passenger side motor mount has given up, and the entire drivetrain is leaning and moving around. I don't know what was used as far as motor mounts goes, but it looks like factory 22re mounts. I've read through this entire thread and I think using the stock mounts is possible.
I added a few pics, can any one venture a guess what was used? (pics are of the driver side)
Thanks
from the pic, it looks like it de attached from frame, don't know if I'm seeing this correctly, if it is the rubber part of mount that is torn or broke, there is a newer mount from Toyota that is a little taller than the older style part # 12361-35091. I would get this mount. then after installed, get vehicle on flat surface and pull power steering cap, and throw a level on reservoir. it should be level