Well i sold my marlin xd 07 adapter when i parted out my 4runner
![Smack! :smack:](https://board.marlincrawler.com/Smileys/marlin/smack.gif)
, and me wanting to put dual cases in the new truck i was kicking myself since marlin has been sold out of non rotated adapters. Ended up ordering an advance adapter 23 spline adapter, so i can bolt my leftover 4.7 case into the truck. I wanted to hold out for another marlin adapter since thats who i wanted to support, but i also want to make it to the roundup this year, so i had to order a different companies adapter.
![Hammer Head :hammerhead:](https://board.marlincrawler.com/Smileys/marlin/hammerhead.gif)
We will see how this one works out, im sure it will be fine though. Here is some pictures since i know a couple people on here were talking about going this route since marlin is out.
As you can see, the adapter arrived with no bearings installed at all.
![](http://i1047.photobucket.com/albums/b477/Dingman90/C39ABCF9-330D-4301-B14F-059D89AD80C0_zpsu173iftx.jpg)
Pressed the roller bearing set into the adapter.
![](http://i1047.photobucket.com/albums/b477/Dingman90/3EA5B3B4-4BA9-49D1-BD28-5F1859BD9129_zps9bjo7wqq.jpg)
As you can see the one bearing gets pressed into the adapter and then the snap ring holds it from moving.
![](http://i1047.photobucket.com/albums/b477/Dingman90/443A7D18-1D2B-4317-B27E-D17F2D211B86_zpssjpgrom5.jpg)
This shows the two bearings installed with the spacer in between the bearings.
![](http://i1047.photobucket.com/albums/b477/Dingman90/528CC338-6954-4FFC-BAB6-F3D4D75BDF8C_zpso54ivgjj.jpg)
Then the coupler gets installed and this snap ring holds it all together.
![](http://i1047.photobucket.com/albums/b477/Dingman90/3F1AF221-8D70-4CB0-9BEC-4A6179CAD449_zpsol76rh35.jpg)