Author Topic: w56C Nor Cal (Read 7094 times)

Sparkplug · « **on:** Apr 30, 2011, 05:04:25 PM »

Like title says, needs to be a w56C, no other. The c series has the shifter for the trans and tcase on the same spot. Its in the 3rd gen 22re trucks and 2nd gen 4runners. Within 150 miles of 96078 Red Bluff CA

crazykooter · « **Reply #1 on:** May 01, 2011, 10:39:29 AM »

Hey spark......just an FYi you can use a G54. They have the same setup if I recall.

Sparkplug · « **Reply #2 on:** May 01, 2011, 06:22:54 PM »

hmmmm, I need it to be in same spot, its a clean nice truck and I dont wanna cut the floor at all, all I care about is its a functioning trans in stock spot, strength isnt a concern to me. Which trucks did the g54 come in?

83 Crawler · « **Reply #3 on:** May 01, 2011, 06:41:22 PM »

a 3rd gen i belive

yotaneck13 · « **Reply #4 on:** May 01, 2011, 07:10:48 PM »

got one spark and only 50k on it 250$ and its yours

Sparkplug · « **Reply #5 on:** May 03, 2011, 09:07:44 PM »

yotaneck13 · « **Reply #6 on:** May 03, 2011, 09:11:05 PM »

ill even meet you half way

Fiercefirstgen559 · « **Reply #7 on:** May 03, 2011, 09:18:25 PM »

G54 can be found in 86 and 87 carb trucks. I've heard they are almost as strong as the W.

Sparkplug · « **Reply #8 on:** May 04, 2011, 10:34:41 PM »

are they the same dimensions though, because if not, then they will not work for me

BoG-ToY · « **Reply #9 on:** May 06, 2011, 08:56:26 AM »

Sparky I've got one. Sell for $200 plus a good case. You come get it!!

crazykooter · « **Reply #10 on:** May 06, 2011, 11:35:59 AM »

Quote from: Sparkplug on May 04, 2011, 10:34:41 PM

are they the same dimensions though, because if not, then they will not work for me

They are identical. Its hard to even tell the diff between a G54 and a W56C.
Imo the G54 is a better transmission. Ive rarely heard of one of them popping out of gear like the W series is known for.
I am pretty sure even the bell housing are interchangeable.

Sparkplug · « **Reply #11 on:** May 06, 2011, 11:58:16 AM »

NO LONGER NEED, I GOT G SERIES OUT THE WAZOO.

thanks crazykooter

Cali-yota · « **Reply #12 on:** May 31, 2016, 02:05:02 PM »

Looking for a tranny to replace the same layout at Sparkplug W56 C. I heard the way to tell a W56 is it has 6 bolts on the shift plate and a G series has 8. Is this correct? I picked this up and didn't know but guy said it was a W56 C but after I got it home noticed the 8 bolts and mine has 6 (hindsight rookie here).

Any good W56 C's out there?

lamkinranch · « **Reply #13 on:** Jun 01, 2016, 03:21:09 PM »

Do you need the case also, or just the tranny?

Cali-yota · « **Reply #14 on:** Jun 02, 2016, 08:20:15 AM »

Both would be great especially if price is right

Cali-yota · « **Reply #15 on:** Jun 02, 2016, 08:44:48 AM »

What tranny is this below?

Quote from: Cali-yota on May 31, 2016, 02:05:02 PM

Looking for a tranny to replace the same layout at Sparkplug W56 C. I heard the way to tell a W56 is it has 6 bolts on the shift plate and a G series has 8. Is this correct? I picked this up and didn't know but guy said it was a W56 C but after I got it home noticed the 8 bolts and mine has 6 (hindsight rookie here).
Any good W56 C's out there?

lamkinranch · « **Reply #16 on:** Jun 03, 2016, 02:44:26 PM »

Forward shift and only 4 bolts on the shifter plate, looks like a G52 to me.

BoG-ToY · « **Reply #17 on:** Jun 08, 2016, 07:33:08 PM »

If that trans is good just run it

BoG-ToY · « **Reply #18 on:** Jun 08, 2016, 07:36:39 PM »

Also, please do not post in 5+ year old listings the belong to someone else!!!!
You woke up a super old thread, that all the original posters get notified of (how I found it) (I don't have a trans to sell anymore)

Erick561 · « **Reply #19 on:** Jun 29, 2016, 07:11:07 PM »

The g has a different shift rail configuration. The w56c w56d and w56e all have the same 6 bolt single baseplate with the dual shifters. The rf1a from a g52/g54 won't bolt up to the w56. I just sold a w56 from my 92 I'm parting out for $150

Erick561 · « **Reply #20 on:** Jun 29, 2016, 07:14:45 PM »

You can crack both rf1a's and swap the shift rails but if you don't have the g54 shift lever SOL just sold one to a hawaiian customer. I Still have the g52/g54 tcase shift lever listed on rbay (i charge the least on there but if not its either cuz of my quality or cuz someone is trying to undercut me so just bring it to my attention and i may be able to undercut them)

Erick561 · « **Reply #21 on:** Jun 29, 2016, 08:59:25 PM »

89-95 w56 forward shift

Sparkplug [OP]

Sparkplug [OP]

Sparkplug [OP]

Sparkplug [OP]

Related Topics