Topic: toyota e locker HELP!!!!!!!

[84 crawler]

i bought a 84 xcab and it has a electric locker on the rear with no wires going to it. there are two plugs on it one is on the motor and one is on the housing the one on the motor is a 6 pin i thinkcan anyone tell me how to make this work.thanx Marliin for the forum

[79coyotefrg]

the plug with the 6 pins is the locking/unlocking wires.   the 2 wire is the indicator light.

this is the plan I used and I got my wire harness (the factory part) from Marlin several years ago,  not sure if they still sell it or not.

[84 crawler [OP]]

Thanx bud I will call Marlin tomorrow and see if they still sell the harness

[ninja turtle]

http://www.marlincrawler.com/air-electronics/wiring-harness/electric-locker-wiring-harness

[79coyotefrg]

http://www.marlincrawler.com/air-electronics/wiring-harness/electric-locker-wiring-harness

there it is


this will plug into your elocker but you'll have to get 12voltguy (or someone else who does custom harness's) to make you a switch panel and the rest of the harness.

http://12voltguy.com/web/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=32&category_id=14&option=com_virtuemart&Itemid=43

[-Jake-]

or you can do it yourself.  use this wiring schematic.

[pumkin toy]

or you can do it yourself.  use this wiring schematic.

Thats how I did mine, very simple and works great!  84 crawler- dont waist time and money making an elaborate wiring harness with the relays and all three LED's.  Its not necessary and creates alot more work.

[84 crawler [OP]]

Thank u guys for ur help

[BoG-ToY]

Hey, I would like to chime in here.
I know that maxwe001 on here was having problems with his elocker, he had to replace his actuator as the limit switch was messed up and I really think that you should used relays. I know that the limit switch can handle the current, but I think you are putting more stress on the limit switch then needed, its only a few more wires and a couple bucks more to put in the relays.

On max's limit switch, he was getting voltage, but no amperage... the switch just wouldnt push the motor anymore.
I just dont want people having to replace there actuators because they didnt use relays

[red450r]

is the harness from 12 bolt guy plug and play? just put a hot and round on it? does it contain relays?

[BoG-ToY]

I really dont know. I wish I did... I would LOVE to start making the relay style...

[red450r]

whats a good price on an e locker

[BoG-ToY]

guy had one here for 200... man I wish I had the cash..lol

[red450r]

I didn't do bad then, bought one last night for 175