Author Topic: IFS is gone!! 3.0 Killer on 1 tons (Read 108740 times)

BLACKDOG · « **on:** Apr 17, 2006, 08:57:18 PM »

First pics of my crawler build, running the MC10 adapter,m gear drive crawl box to chain drive rear case!!

I got to the point of installing the snap ring on the main shaft, but I broke my old pair of snap rings, and broke the new pair I bought

Gonna get some real heavy duty ones this week

I've been following the marlin online instructions for assembling the crawler, awesoem job guys!! Very easy to do

I can't wait to finish this!!

*EDIT*

Now that I have almost finished moving, it is time to get to the important stuff!! I have a long list of things I'd like to do to my truck this summer, and decided that I would compile them into one thread

Here is what I want/need to do, and the possible order of events

1. Install duals
2. driveshafts
3. Half doors
4. Rear Bumper
5. Body work/ Paint (.98 walmart paint doesn't hold up well)
6. Rocklights
7. CB
8. If there is time and $$, SA!

BLACKDOG · « **Reply #1 on:** Apr 17, 2006, 08:58:40 PM »

79coyotefrg · « **Reply #2 on:** Apr 17, 2006, 09:04:24 PM »

BD got it goin on

i never got a turtle nob $I\'m Down$

*FFC* · « **Reply #3 on:** Apr 17, 2006, 09:06:43 PM »

Can't wait to see it crawlin

Rocksurfer · « **Reply #4 on:** Apr 17, 2006, 09:14:02 PM »

BLACKDOG · « **Reply #5 on:** Apr 17, 2006, 10:14:18 PM »

Quote from: 79Coyotefrg on Apr 17, 2006, 09:04:24 PM

BD got it goin on

i never got a turtle nob $I\'m Down$

sorry glen, you want mine?

Quote from: FordFreakChik on Apr 17, 2006, 09:06:43 PM

Can't wait to see it crawlin

Me neither!!! Mabye I won't need that SA after all

but I'll put it on there anyway

I'm tired of wearing my tires weaird

so, FFC, looks like I'll be ready to push you through the 'con again,

this time with my truck!!!

*FFC* · « **Reply #6 on:** Apr 17, 2006, 10:17:07 PM »

Quote from: BLACKDOG on Apr 17, 2006, 10:14:18 PM

so, FFC, looks like I'll be ready to push you through the 'con again, this time with my truck!!!

Nawww I can make it without any pushin this time

......hopefully

synwars · « **Reply #7 on:** Apr 18, 2006, 06:38:36 AM »

Snap-on worked for me...

KDC · « **Reply #8 on:** Apr 18, 2006, 03:34:01 PM »

Quote from: BLACKDOG on Apr 17, 2006, 08:57:18 PM

First pics of my crawler build, running the MC10 adapter,m gear drive crawl box to chain drive rear case!!

I got to the point of installing the snap ring on the main shaft, but I broke my old pair of snap rings, and broke the new pair I bought Gonna get some real heavy duty ones this week

I've been following the marlin online instructions for assembling the crawler, awesoem job guys!! Very easy to do I can't wait to finish this!!

Whoa! Is that MC-10 a prototype? That's gonna be sweet!

BLACKDOG · « **Reply #9 on:** Apr 18, 2006, 03:58:14 PM »

Quote from: KDC on Apr 18, 2006, 03:34:01 PM

Whoa! Is that MC-10 a prototype? That's gonna be sweet!

I can't wait to get it in!!! I'm actually working on it as we speak

BLACKDOG · « **Reply #10 on:** Apr 18, 2006, 04:18:32 PM »

New pics!!!

BLACKDOG · « **Reply #11 on:** Apr 18, 2006, 04:24:17 PM »

I've got the reduction box and the adapter ready to be bolted together (I think) but I'm not sure what the two things in picture6 are? Can anyone help me out? Please? I'd like to get these together tonight

Also, anyone whose put these together, does it look like I'm missing anything? I don't think so, I've followed the dirctions from the marlincrawler.com site very closely, so I'm not too worried, but a double check never hurts

MiniSimp · « **Reply #12 on:** Apr 18, 2006, 04:27:11 PM »

Sweet!

BigMike · « **Reply #13 on:** Apr 18, 2006, 04:38:35 PM »

Nice!! Now you REALLY don't have an excuse to not bring your truck to the ROUND UP

BLACKDOG · « **Reply #14 on:** Apr 18, 2006, 04:43:23 PM »

Quote from: BigMike on Apr 18, 2006, 04:38:35 PM

Nice!! Now you REALLY don't have an excuse to not bring your truck to the ROUND UP

yu huh

I still have a 3.0

that was the reason last year

79coyotefrg · « **Reply #15 on:** Apr 18, 2006, 07:38:49 PM »

looks like the taller one is the tcase to tranny coupler, aint sure about the other but looks like a seal adapter probably for the geardrive case to chaindrive case

BLACKDOG · « **Reply #16 on:** Apr 18, 2006, 07:47:05 PM »

Ok, i think you're probably right on the first one, but not so sure on the second one. THere really isn't a good place for it to go (these things kinda just fall together it seems like) but mabye it'll become clear when I pull the t-case outta the truck

Thanks Glen

$Beer Chug\'n$

Quote from: BLACKDOG on Apr 18, 2006, 04:24:17 PM

I've got the reduction box and the adapter ready to be bolted together (I think) but I'm not sure what the two things in picture6 are? Can anyone help me out? Please? I'd like to get these together tonight

Also, anyone whose put these together, does it look like I'm missing anything? I don't think so, I've followed the dirctions from the marlincrawler.com site very closely, so I'm not too worried, but a double check never hurts

ANyone else?

Rocksurfer · « **Reply #17 on:** Apr 18, 2006, 08:28:23 PM »

I am soooooooo jealous!!!

kneedownnate · « **Reply #18 on:** Apr 18, 2006, 10:31:10 PM »

You lucky bastid! I'm glad you're finally getting some goodies fo yo ride

synwars · « **Reply #19 on:** Apr 18, 2006, 10:32:12 PM »

Quote from: BLACKDOG on Apr 18, 2006, 07:47:05 PM

ANyone else?

The black double lipped seal looks like a tranny output seal.

That's about all I got...

I am confident that once you have the t-case out you will be able to put all the pieces of the puzzle together correctly.

Brandon · « **Reply #20 on:** Apr 20, 2006, 05:41:03 PM »

those aren't snap rings

they are lock rings, you need lock ring pliers..

(the red handle dudes)

looks nice! Let me know if ya need a hand or need to borrow anything!

johnnygalt · « **Reply #21 on:** Apr 20, 2006, 08:53:29 PM »

BD,

Looks like Scott made 2, b/c I have the same chain drive adaptor in my garage

I haven't installed mine yet, I need to get my SAS done first. Marlin sent me the same two couplers as well. Wish I could be of some help...but I'll be following your thread!!!

BLACKDOG · « **Reply #22 on:** Apr 20, 2006, 09:06:28 PM »

Quote from: Brandon on Apr 20, 2006, 05:41:03 PM

those aren't snap rings

they are lock rings, you need lock ring pliers..

(the red handle dudes)

looks nice! Let me know if ya need a hand or need to borrow anything!

Brandon, no, I broke them on the mainshaft, going into the adapter

there is a legitamate snap ring on that side. However, I did use my snap ring pliers on the lockrings as well

took a little finessing, but it worked. Thanks for the offer, so far its going well, but when I get it done, Ill have to bring it by to show ya

Quote from: johnnygalt on Apr 20, 2006, 08:53:29 PM

BD,

Looks like Scott made 2, b/c I have the same chain drive adaptor in my garage I haven't installed mine yet, I need to get my SAS done first. Marlin sent me the same two couplers as well. Wish I could be of some help...but I'll be following your thread!!!

I was wondering who got the other set

I do indeed have #2

I don't think that is quite right though, #2 being in before #1??

I'm going to do my SA later this summer, using a square d-shaft so I don't have to rebuild it later

Brandon · « **Reply #23 on:** Apr 20, 2006, 10:15:49 PM »

The pic really wasn't of anything but the tool - I don't recall ANY snap rings in the case?

Anyway, can't wait to see it done!

johnnygalt · « **Reply #24 on:** Apr 20, 2006, 10:22:36 PM »

funny, sounds like our order of mods is just reversed

I'm running a high pinion, so not sure if I'll need to run a CV shaft, but I want the ability to drive at 50mph in 4wd so no square tube shaft...

synwars · « **Reply #25 on:** Apr 21, 2006, 06:16:14 AM »

Quote from: Brandon on Apr 20, 2006, 10:15:49 PM

The pic really wasn't of anything but the tool - I don't recall ANY snap rings in the case?

I think he is refering to a snap ring like the one pictured below on the main shaft. It's a hefty little guy. Two sets of hands are nice to have when installing, but it can be done with one.

Yes? No?

BLACKDOG · « **Reply #26 on:** Apr 21, 2006, 02:14:19 PM »

Quote from: synwars on Apr 21, 2006, 06:16:14 AM

I think he is refering to a snap ring like the one pictured below on the main shaft. It's a hefty little guy. Two sets of hands are nice to have when installing, but it can be done with one.

Yes? No?

yes, that little b*std is the one

I bought some lisle heavy duty snap ring pliers, those strecthed that snap ring far enough that I could slide it on by myself

its nice having good tools for the job

Quote from: Brandon on Apr 20, 2006, 10:15:49 PM

The pic really wasn't of anything but the tool - I don't recall ANY snap rings in the case?

Anyway, can't wait to see it done!

Yeah, that was my bad, I'll fix it

I was thinkin those were uploaded from your comp, so they wouldn't show up on the quote, didn't think that they may have been linked from rcrc4x4

synwars · « **Reply #27 on:** Apr 21, 2006, 03:18:05 PM »

Quote from: BLACKDOG on Apr 21, 2006, 02:14:19 PM

yes, that little b*std is the one

I bought some lisle heavy duty snap ring pliers, those strecthed that snap ring far enough that I could slide it on by myself its nice having good tools for the job

Good to hear, keep it up!!!

johnnygalt · « **Reply #28 on:** May 10, 2006, 02:18:26 PM »

Bump. Any update?

BLACKDOG · « **Reply #29 on:** May 15, 2006, 08:23:08 PM »

Quote from: johnnygalt on May 10, 2006, 02:18:26 PM

Bump. Any update?

Not really, I've got the crawler completely together, just need the time to drop it in, pickup my front driveshaft from yotee, and order my rear. I'm probably gonna start memorial day weekend, after I'm done moving

I can't wait!!!

Here's some pics, My puppy max decided he was gonna help

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

BLACKDOG [OP]

Related Topics