Topic: WTB 99 3rz 4runner manual swap parts

[ryantowry_81]

i am looking at swapping my auto for a manual in my 99 3rz 4runner

here are the parts i am trying to gather:

w56 transmission
w59 bellhousing
3rz flywheel
clutch master and slave c yl and hard line to connect the two.
clutch pedal assembly, i am not sure but i think the tacoma would be the same?
ECU for 99 3rz 4x4 4runner

let me know if you have anything on the list and what you want for it. i am in northern California about an hour north of Sacramento but i think i could ship some of the smaller parts.

thanks,

Ryan

[HogCanyonHopper]

Ryan- make sure you specify that you are looking for a 5 speed ecu. I think any Tacoma 5spd 97-99 would work perfect. and I have a 99 Tacoma here with the pedal assemblies still in it.

[ryantowry_81 [OP]]

Ryan- make sure you specify that you are looking for a 5 speed ecu. I think any Tacoma 5spd 97-99 would work perfect. and I have a 99 Tacoma here with the pedal assemblies still in it.

You are correct. i do need to look through and see if my runner is california emissions or not, from my research there is a different ECU part # for federal vs california emissions through 5/99. 6/99 on seems to be the same for the 3rz.

I am not sure yet if the taco ECM and runner are the same, i hope they are because you see alot more 3rz 5 speed tacos.

what do you want for the pedal assembly? i can come pull it when i get back.

[HogCanyonHopper]

I think any CA 5spd taco ecu would work for your application (W56). as far as those pedal assemblies, you can come get them any time. we could work out a trade or something. let me know

[89 runner]

I have what your looking for
 w56 transmission, w59 bell housing, engine wiring harness,ECM from a 98 4runner- I dont know if i want to get rid of it i was going to do the same thing to my runner and then SAS it at the same time, But its my DD until my other runners are up and on the road- so whats it worth to you- shoot me an offer.

[ryantowry_81 [OP]]

I think any CA 5spd taco ecu would work for your application (W56). as far as those pedal assemblies, you can come get them any time. we could work out a trade or something. let me know

awesome Joe, maybe when i get back from AK i can come up with some beer and maybe a hoodie and grab those and hopefully plan out memorial day.

I have what your looking for
 w56 transmission, w59 bell housing, engine wiring harness,ECM from a 98 4runner- I dont know if i want to get rid of it i was going to do the same thing to my runner and then SAS it at the same time, But its my DD until my other runners are up and on the road- so whats it worth to you- shoot me an offer.

PM sent