Author Topic: thinking about building a fab table  (Read 1376 times)

0 Members and 1 Guest are viewing this topic.

NCK4L

  • Offline Crawler Guru
  • ****
  • Turtle Points: -2
  • Male Posts: 522
  • Member since Oct '08
thinking about building a fab table
« on: Jun 07, 2012, 10:43:48 PM »
 I wanna build a fab table for my shop and thought i would see if anyone here has one or has built one. my plan was to use a 4x8 piece of .25 plate dont know if that will be thick enough, havent decided on a frame yet but i wanted to put it on casters and be able to level it up with some sort of thread adjustment. Any ideas would be great, Thanks.

TacoRunner

  • Offline The 2K Group
  • ***
  • Turtle Points: 19177
  • Male Posts: 2,324
  • Member since Feb '04
  • The 1st 3RZ swap 99'-01'
    • 4wheelunderground
Re: thinking about building a fab table
« Reply #1 on: Jun 10, 2012, 05:43:01 PM »
I have a 4'x8' table, 1" think with flame cut edges. Has 6  4"x4" posts on casters with 6 adjustable feet to level out the table. The best part of that is the flame cut 1". Not round edges at the corners and by not shearing it the table stays more true.
www.4WHEELUNDERGROUND.com
info@4wheelunderground.com
AKA The GODFATHER The 3RZ Original

Performance Tuned shocks for Leaf Sprung Vehicles   http://www.4wheelunderground.com/Tuning.html

86yoter

  • Offline Rock Master
  • ***
  • Turtle Points: -18
  • Male Posts: 314
  • Member since Mar '12
  • and the work continues
    • 86' runner build
    • Buy me a beer
Re: thinking about building a fab table
« Reply #2 on: Jun 23, 2012, 09:42:04 AM »
ya mor info would be good. Starting my garage working space and want to do some kind of fab table also. i have seen some that there were no plate on top just 1" sq tubing
86' runner nothing special

pumkin toy

  • Offline Silver Turtle Award
  • *
  • Turtle Points: -5
  • Male Posts: 3,561
  • Member since Sep '05
  • Do You Know A Sweeney Bro?
    • Buy me a beer
Re: thinking about building a fab table
« Reply #3 on: Jun 23, 2012, 11:47:03 AM »
ive got a table i built thats up againt the wall in my garage.  its like 32" deep and about 8' long.  made out of 3/8" plate top with 1 1/2" square tube legs.  Its plenty heavy and strong enough for any fabbing i do at home. Ive got a 6" vice mounted to it and I also have a steel rack that i put in about midway up the legs. That way i can pile up all my small materials under the table and also have room under that shelf for storing other stuff. When i built mine I made a top frame out of 1 1/2" x 1 1/2"x 1/4" angle and then welded the 3/8" plate to the top.  that gave me a nice rigid 5/8" thick clamping surface all around the edges.  If i had a larger garage it would be nice to have a table out in the middle of the space somewhere so its accessable from all sides, but I dont have room for that.

What do you plan on using your table for?  do want it big enough to build tube chassis frames and things like that on, or are you just using it for small fab projects? 
97 4runner Limited
4runner Build Thread http://board.marlincrawler.com/index.php?topic=54076.1410#lastPost

Started my own fab business recently check out the website  www.c4fabrication.com

also follow C4Fab on facebook for regular updates on projects. http://www.facebook.com/pages/C4-Fabrication/454285357953823

BadnewsBob

  • Offline Rock Master
  • ***
  • Turtle Points: 9
  • Male Posts: 350
  • Member since Sep '11
    • Buy me a soda
Re: thinking about building a fab table
« Reply #4 on: Sep 04, 2012, 06:54:27 AM »
Will the 1/4 or 3/8s hold up well to some heavy hammering?  I know a 4'x4'x1/4" will handle my welding chores but I don't want to distort it banging on it.   :_order:       I think I need to find a big anvil. :hammerhead:
AE2 USN ret
No matter where ya go..... there ya are.
Hillbilly Offroad
84 xtra cab on 63" chevies and RUF 35" KM2s 22R 5 speed DTC 5.29s Locked front and rear.

junya92toy

  • Offline The 1.5K Club
  • **
  • Turtle Points: -64
  • Male Posts: 1,500
  • Member since Nov '04
  • Drinking me beer
Re: thinking about building a fab table
« Reply #5 on: Sep 04, 2012, 10:34:29 AM »
1/4, 3/8s, whatever you use,  you could beat on it a little if the table frame is strong enough. Just let it over hang the frame about 6 inches to allow clamps ot be easy to use. But a anvil is a great thing to have in the shop as well
Dr.Maxwe001 well i have a 15 gal compressor now and if I gett he 60  and then use the 15 as a reserve that wil give me 75 gal  thats close to 80 isnt it ?

 
 
 
 
 

Related Topics

2 Replies
1041 Views
Last post Oct 13, 2004, 08:51:30 AM
by bsilva132
4 Replies
861 Views
Last post Aug 17, 2007, 09:55:19 PM
by Shamb
0 Replies
750 Views
Last post Oct 02, 2007, 01:15:05 AM
by NWyoat
40 Replies
6819 Views
Last post Jan 09, 2008, 06:11:24 PM
by SWAMPER
8 Replies
2252 Views
Last post Jul 15, 2008, 03:16:14 PM
by 79coyotefrg