Author Topic: A Special 85 build.... (Read 31689 times)

Mudfanatic92 · « **Reply #150 on:** Jun 30, 2012, 09:51:34 PM »

So a bit of an update. So Matt, a buddy of mine, and i tore into it and not really accomplished anything. Got half a front hanger on, got the WELDED bench seat out and half way got the tranny out for my W56 tranny to go in. Didnt really take alot of pics.

THK Matt · « **Reply #151 on:** Jul 01, 2012, 01:01:21 AM »

Hey i need that grinder and hammer lol

santa cruz crawler · « **Reply #152 on:** Jul 01, 2012, 08:31:18 AM »

, get er dun

Mudfanatic92 · « **Reply #153 on:** Jul 04, 2012, 06:31:14 PM »

Ok, so matt came out for a bit and help me tie some stuff together. We first got the weight on the rear(FINALLY), started to get the Tranny and tcase pulled out but them top 2 bolts kicked our @$$..... so we gave up and started to tinker with the wiring before he had to take off... When my welder finally got there, we finished welding the rear front hanger and the front hanger. Now in all my wisdom and hastiness, we(Dayne) welded the front crossmember welded 1/4" off to the side(off center) but i figured since its a 130 welder, ill cut the welds when i can and re-position it and weld it fully with a better grade 230 welder.

Anyways, here is the crossmember welded and weight bearing.

Here is one with my baby and my nephew(he really wants to go crawling with me since i started this project).

Here is a shot of the other side.

And one with the cab all cleaned out and the seats bolted in.

So once i figure out the trick to the 2 bolts on the top of the Trans to motor bolts, ill swap the W-56 trans over and figure out what clutch i got to use is best, figure out the rat nest they PO called wiring, get the ignition(key) figured out, Shock hoops and Shocks, then drivelines...

THK Matt · « **Reply #154 on:** Jul 04, 2012, 06:48:29 PM »

BITCHIN! that thing is lookin good man. glad to see it coming along. Ours are close to being done.

Look at that, Faith is all posin for the picture. Atta kid! lol
Sunday, Ill have those mounts welded up for my front shackles.

THK Matt · « **Reply #155 on:** Jul 05, 2012, 12:32:19 PM »

Quote from: THK Matt on Jul 04, 2012, 07:00:43 PM

and here is some pictures from today, I went to Elk, WA and helped cody out a little bit.
Here's his "shop" lol just got the rear on some weight and was waiting for Dayne to arrive to weld.

Mudfanatic92 · « **Reply #156 on:** Jul 06, 2012, 10:49:17 PM »

So i got the G52 out today and threw in my W56 with some help from my bro!

G series

W56 installed and bolted in!!

Nimyad · « **Reply #157 on:** Jul 07, 2012, 07:46:57 AM »

It's coming along nicely man. That guy get back to you for that dual case adapter?

fullsizenomore · « **Reply #158 on:** Jul 07, 2012, 08:55:34 AM »

Gentlemen, wicked work boys. Always nice to see a new Yota, The only thing I say would that you should have used POR15 paint on the frame, but you always can in the future .

Quintin · « **Reply #159 on:** Jul 07, 2012, 09:57:11 AM »

Keep up the good work.

Travis H · « **Reply #160 on:** Jul 07, 2012, 10:02:52 AM »

why not wash the mud off? i hate working under a truck that is constantly dropping dirt in my eyes.

besides that it looks great.

THK Matt · « **Reply #161 on:** Jul 07, 2012, 03:39:06 PM »

Thanks guys for the props, I think Cody is movely along quickly with the build and its turning out good.
Glad to see you got the trans swapped man.

Ill have some progress tonight ;]

THK Matt · « **Reply #162 on:** Aug 13, 2012, 07:21:23 PM »

THIS HAS A MAJOR UPDATE!!!!

$Beer Chug\'n$

Nimyad · « **Reply #163 on:** Aug 13, 2012, 07:38:46 PM »

What did he actually sell it?

THK Matt · « **Reply #164 on:** Aug 13, 2012, 07:42:54 PM »

Oh no. upgrade.

Nimyad · « **Reply #165 on:** Aug 13, 2012, 07:45:28 PM »

Well tell him to post up!

Mudfanatic92 · « **Reply #166 on:** Aug 13, 2012, 10:17:56 PM »

Alright fellas, so a kinda update on the truck. Picked up a runner seat that was in real nice condition, a sweet hood, fender, and door hinges. Got them installed and make the trick awesome lookin.

But once I'm kinda at a stand still with ignition and working this beast together(even though it's still carb'd). So I got to thinking, I really wanna haul buddies around and I wanna have a removable top. So I was gonna look at getting just a runner tub and swap over whatever I need. So today I was searching around and found an awesome... Opportunity

It's a very unmolested rig(74 yr old gramps owns it) except for the drivers side upper core support is smashed from a flat bed truck. Now I find it awesome that in the earlier pic of the fender I just got is perfect replacement for the one missing.

Anyways, specs for the new rig.

87 4runner - 218k miles on frame
22re - 15 k on rebuild
5spd - stock w56?
Stock everything else.
Not sure if it's sr5 or not...

Oh and I think it's a fair price of $850....

Nimyad · « **Reply #167 on:** Aug 13, 2012, 10:34:43 PM »

Saw that on Craigslist, thought about picking it up too. The trans id should be on the door plate.

Mudfanatic92 · « **Reply #168 on:** Aug 13, 2012, 10:37:29 PM »

Gonna go to Colville and purchase it the 23rd

Nimyad · « **Reply #169 on:** Aug 13, 2012, 10:42:43 PM »

Sweet. Get something done and lets wheel!! Went to compressor again last sunday.

Mudfanatic92 · « **Reply #170 on:** Aug 13, 2012, 10:54:56 PM »

I saw... How'd that log feel?

I'd prolly be done of you come over and helped.. Sheesh...

Nimyad · « **Reply #171 on:** Aug 13, 2012, 11:05:36 PM »

Felt awesome, about a minute and a hammer and the bed'll be good as new! Probably! But I still have crap to do to my truck. Worked on it all last week. Now I have some more lights to add and bodywork to do.

THK Matt · « **Reply #172 on:** Aug 14, 2012, 05:37:06 AM »

Quote from: nimyad on Aug 13, 2012, 10:34:43 PM

Saw that on Craigslist, thought about picking it up too. The trans id should be on the door plate.

that 87 should be w56.
Can't wait to come get that thing swapped dude.

jimbo74 · « **Reply #173 on:** Aug 14, 2012, 04:11:44 PM »

love he 4runner!

this is going to be sweet

Mudfanatic92 · « **Reply #174 on:** Aug 14, 2012, 04:14:37 PM »

Quote from: jimbo74 on Aug 14, 2012, 04:11:44 PM

love he 4runner! this is going to be sweet

Oh its gonna be epic.... its gonna be clean and tidy and done right... unlike the one i was currently building. Its gonna be a whole lot quicker too since i have virtually everything to make it trail worthy.

THK Matt · « **Reply #175 on:** Aug 14, 2012, 09:44:18 PM »

should have it done in a weekend bro. minus shocks.

Mudfanatic92 · « **Reply #176 on:** Aug 23, 2012, 12:27:34 PM »

Well it seems the guy sold it from under me so it's a sad day...

Nimyad · « **Reply #177 on:** Aug 23, 2012, 03:24:39 PM »

So get back to work!

Nimyad · « **Reply #178 on:** Nov 06, 2012, 12:52:00 PM »

Bumpity bump bump bump

THK Matt · « **Reply #179 on:** Nov 09, 2012, 02:46:38 AM »

been a few weeks, since I spoke to Cody.. but he was parting it all out. needed the money. I dont know what he still has or if he sold anything

Mudfanatic92 [OP]

Mudfanatic92 [OP]

Mudfanatic92 [OP]

Mudfanatic92 [OP]

Mudfanatic92 [OP]

Mudfanatic92 [OP]

Mudfanatic92 [OP]

Related Topics