Topic: 22R Tto GM auto?

[hotwrench4hire]

wanting to adapt an 22r to a 350 turbo transmission, is there an adapter out there? or is there a better suited auto trans?
I have 22R and an 4-1 Atlas case, don't want the Toyota auto, and don't want a manual, thanks!

[Nimyad]

Does the 22r even have enough power to spin a turbo 350?

[R.DesJardin]

wanting to adapt an 22r to a 350 turbo transmission, is there an adapter out there? or is there a better suited auto trans?
I have 22R and an 4-1 Atlas case, don't want the Toyota auto, and don't want a manual, thanks!

Why not an A340? Just as tough or tougher than a TH350. Easy to adapt to, like they came that way, I just replaced my 22r with a 2RZ in front of a dual cased A340, DWT has a A340 with an Altas. It's just not a matter of an adapter plate, starter location and mounting, TC size and bolt pattern, lot of stuff that isn't simple to adapt.

[hotwrench4hire [OP]]

Does the 22r even have enough power to spin a turbo 350?

MY 22r has been built up a wee bit

[hotwrench4hire [OP]]

Why not an A340? Just as tough or tougher than a TH350. Easy to adapt to, like they came that way, I just replaced my 22r with a 2RZ in front of a dual cased A340, DWT has a A340 with an Altas. It's just not a matter of an adapter plate, starter location and mounting, TC size and bolt pattern, lot of stuff that isn't simple to adapt.

a340 is electronic, nuff said, I know there is more to it than an adapter plate, that's why I am asking, see if its been done, and I have a new 350 and an Atlas 4-1 case, was going to go 4.3 but I want to use this motor

[R.DesJardin]

Better check it out you don't need a computer on a A340, well at least I don't. I do get why you want to keep your TH350.

[BadnewsBob]

LC engineering make a 22R to chevy adapter plate and a flex plate to do it......I know nothing else about it thou, And I basically just ask the same question in another thread.

What dose the A340 come in?

[hotwrench4hire [OP]]

LC engineering make a 22R to chevy adapter plate and a flex plate to do it......I know nothing else about it thou, And I basically just ask the same question in another thread.

contacted LC, they get it done
http://www.toyotacatalog.net/M1WebGear/ProductDetails.aspx?PartUniqueID=A1428416-A244-468F-A4F3-E0E3795DC8E3  Adapter
 
 
http://www.toyotacatalog.net/M1WebGear/ProductDetails.aspx?PartUniqueID=51BCD153-3BCC-4125-9DB5-219F645F4851 Flexplate

[BadnewsBob]

Good deal. Glad I could point ya in the right direction.

[OOPS]

I think Advance Adapter also make one.

[hotwrench4hire [OP]]

I think Advance Adapter also make one.

nothing made by Advanced, checked them, and the other normal places