Author Topic: Tube Doors - Wiring Disconnect for Power Windows (Read 2466 times)

CrankyCrawler · « **on:** Apr 11, 2011, 09:29:43 AM »

Hello everyone. It has been a long while since I have posted on here. I recently met up with Blackdiamond (bdrunner) in Moab and he loaned me his tube doors. My truck is an 84' and has power windows. What have people done to disconnect the wires to the windows when using the tube doors? I did some searching and did not come up with anything. Thanks.

chim · « **Reply #1 on:** Apr 11, 2011, 09:34:26 AM »

You can search for "Door Jamb Wire Eliminators".. I did a quick search and this may work for you...
http://www.carolinacustom.com/pages/product_pages/door_jamb_wire_eliminators/door_jamb_wire_eliminators_page.jsp

CrankyCrawler · « **Reply #2 on:** Apr 11, 2011, 04:17:03 PM »

Chim. Thanks for the link. I think that might be something that would work for me.

OOPS · « **Reply #3 on:** Apr 11, 2011, 05:16:47 PM »

Quote from: chim on Apr 11, 2011, 09:34:26 AM

You can search for "Door Jamb Wire Eliminators".. I did a quick search and this may work for you...
http://www.carolinacustom.com/pages/product_pages/door_jamb_wire_eliminators/door_jamb_wire_eliminators_page.jsp

That is a good idea, to bad they cost so much. This is what I did for the speakers when I change from full doors to half doors.

CrankyCrawler · « **Reply #4 on:** Apr 12, 2011, 11:16:05 AM »

Thanks OOPS.

Author Topic: Tube Doors - Wiring Disconnect for Power Windows (Read 2466 times)

CrankyCrawler

Tube Doors - Wiring Disconnect for Power Windows

chim

Re: Tube Doors - Wiring Disconnect for Power Windows

CrankyCrawler [OP]

Re: Tube Doors - Wiring Disconnect for Power Windows

OOPS

Re: Tube Doors - Wiring Disconnect for Power Windows

CrankyCrawler [OP]

Re: Tube Doors - Wiring Disconnect for Power Windows

Related Topics


	Author Topic: Tube Doors - Wiring Disconnect for Power Windows (Read 2466 times) 0 Members and 2 Guests are viewing this topic. CrankyCrawler Rock Crawl'n Turtle Points: -1 Posts: 30 Member since Dec '08 Tube Doors - Wiring Disconnect for Power Windows « on: Apr 11, 2011, 09:29:43 AM » Hello everyone. It has been a long while since I have posted on here. I recently met up with Blackdiamond (bdrunner) in Moab and he loaned me his tube doors. My truck is an 84' and has power windows. What have people done to disconnect the wires to the windows when using the tube doors? I did some searching and did not come up with anything. Thanks. Logged 1984 Toyota Pickup: Dual Ultimate with 4.7's in rear, R10 FROR Crossmember, FROR Twin Stick, Aussie Front with 4.88's and 30 Spline Longfield's, Rear Detroit with 4.88's, Custom ORS front and rear bumpers, ORS sliders and shock towers, Alcan 4" springs, 35" Cooper Discoverer MT's, Bed bobbed 12", and Soft Top. http://www.offroadsolutions.com/customerprojects.html - Robert's 1984 Pickup http://www.offroadsolutions.com/orsbbq08.html chim The 1K Club Turtle Points: 1302 Posts: 1,258 Member since Apr '05 www.infowars.com Re: Tube Doors - Wiring Disconnect for Power Windows « Reply #1 on: Apr 11, 2011, 09:34:26 AM » You can search for "Door Jamb Wire Eliminators".. I did a quick search and this may work for you... http://www.carolinacustom.com/pages/product_pages/door_jamb_wire_eliminators/door_jamb_wire_eliminators_page.jsp Logged Trust in the Lord, Dont be a Mormon www.infowars.com Old Build: http://board.marlincrawler.com/index.php?topic=14309.0 Failed Build: http://board.marlincrawler.com/index.php?topic=61026 Back on track Build: http://board.marlincrawler.com/index.php?topic=78456.0 Old: http://board.marlincrawler.com/index.php?topic=97491.0 Old 3rd Gen Adventures: http://www.toyota-4runner.org/3rd-gen-t4rs/195562-chims-99-a.html CrankyCrawler [OP] Rock Crawl'n Turtle Points: -1 Posts: 30 Member since Dec '08 Re: Tube Doors - Wiring Disconnect for Power Windows « Reply #2 on: Apr 11, 2011, 04:17:03 PM » Chim. Thanks for the link. I think that might be something that would work for me. Logged 1984 Toyota Pickup: Dual Ultimate with 4.7's in rear, R10 FROR Crossmember, FROR Twin Stick, Aussie Front with 4.88's and 30 Spline Longfield's, Rear Detroit with 4.88's, Custom ORS front and rear bumpers, ORS sliders and shock towers, Alcan 4" springs, 35" Cooper Discoverer MT's, Bed bobbed 12", and Soft Top. http://www.offroadsolutions.com/customerprojects.html - Robert's 1984 Pickup http://www.offroadsolutions.com/orsbbq08.html OOPS The 2.5K Group Turtle Points: 1304 Posts: 2,561 Member since May '02 Re: Tube Doors - Wiring Disconnect for Power Windows « Reply #3 on: Apr 11, 2011, 05:16:47 PM » Quote from: chim on Apr 11, 2011, 09:34:26 AM You can search for "Door Jamb Wire Eliminators".. I did a quick search and this may work for you... http://www.carolinacustom.com/pages/product_pages/door_jamb_wire_eliminators/door_jamb_wire_eliminators_page.jsp That is a good idea, to bad they cost so much. This is what I did for the speakers when I change from full doors to half doors. Speaker wire block.jpg (5.49 kB, 345x235 - viewed 360 times.) Speaker Wiring Half Door.JPG (62.15 kB, 640x480 - viewed 838 times.) « Last Edit: Apr 11, 2011, 05:26:59 PM by OOPS » Logged David & Theresa Fritzsche, 1990 Ex-Cab with a few mods!!!!!!!!! Roseville, CA Sobriety =Serenity CrankyCrawler [OP] Rock Crawl'n Turtle Points: -1 Posts: 30 Member since Dec '08 Re: Tube Doors - Wiring Disconnect for Power Windows « Reply #4 on: Apr 12, 2011, 11:16:05 AM » Thanks OOPS. Logged 1984 Toyota Pickup: Dual Ultimate with 4.7's in rear, R10 FROR Crossmember, FROR Twin Stick, Aussie Front with 4.88's and 30 Spline Longfield's, Rear Detroit with 4.88's, Custom ORS front and rear bumpers, ORS sliders and shock towers, Alcan 4" springs, 35" Cooper Discoverer MT's, Bed bobbed 12", and Soft Top. http://www.offroadsolutions.com/customerprojects.html - Robert's 1984 Pickup http://www.offroadsolutions.com/orsbbq08.html