Topic: need part asap, 1995 3.4 tacoma steering knuckle with manual hubs

[ROCK CRUSHER]

hey guys and gals i have a 1995 tacoma that had the drivers wheel bearing go bad and every shop i bring the knuckle to cant get the bearing out even after heating it up and doing whatever else. so basically i need the drivers knuckle with manual locking hubs that has the wheel bearing, spindle all that stuff. its a 95 tacoma 4x4 manual locking hubs 3.4 motor. If you know where i can get one that would be great thanks zak

[THK Matt]

hey guys and gals i have a 1995 tacoma that had the drivers wheel bearing go bad and every shop i bring the knuckle to cant get the bearing out even after heating it up and doing whatever else. so basically i need the drivers knuckle with manual locking hubs that has the wheel bearing, spindle all that stuff. its a 95 tacoma 4x4 manual locking hubs 3.4 motor. If you know where i can get one that would be great thanks zak

take it to a shop that works on heavy equipment (graders, dump trucks, etc.) and have them press out the bearing and race.

[ROCK CRUSHER [OP]]

tried that, they stopped cause they were affraid of breaking the knuckle itself, if i had the money i would just do a sas swap. i just need to do this fix and a couple months from now hopefully i can have everything i need to do that swap

[joshcraig09]

man i have a whole ifs frontend i just cut out from under mine... where u live?

[ROCK CRUSHER [OP]]

marysville were do you live