Author Topic: 83 harness in a 80 truck no heat or ac working  (Read 1677 times)

0 Members and 1 Guest are viewing this topic.

Dr.Maxwe001

  • Offline Crawler Guru
  • ****
  • Turtle Points: -23
  • Male Posts: 627
  • Member since Jan '05
  • Crawling with Marlin
    • View Profile
83 harness in a 80 truck no heat or ac working
« on: Dec 13, 2010, 07:27:22 PM »
 I swaped over a 1983 harness COMPLETE into my 1980 4wd truck I have the old 1980 harness still here in my garage. I am trying to get my heater to work and I cant.
I have tried everything I know to do i have taken the old ac heater harness from the 1980 harness and tried to figure out where all the unhooked parts are  I have a FSM for a 1980 truck and i also have the wiring diagrams for a 1983 truck there should be to much diffrence IF ANY in the two years as for the HEATER A/C stuff.     :help:      :turtle: :turtle: :turtle:
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: 83 harness in a 80 truck no heat or ac working
« Reply #1 on: Dec 13, 2010, 07:33:33 PM »
the 80 used a fan control switch that was straight up and down, the 83 used a rotary style knob
just remember the fan is almost certainly the same fan so THAT plug should be the same

the only wires you need to worry about are the wires from the lo-med-hi switch to the fan. everything else is manual activation
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: 83 harness in a 80 truck no heat or ac working
« Reply #2 on: Dec 13, 2010, 07:34:47 PM »
i'll look tomorrow and see but i'd be willing to bet the wires to the fan control switches are the same color code
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Dr.Maxwe001 [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: -23
  • Male Posts: 627
  • Member since Jan '05
  • Crawling with Marlin
    • View Profile
Re: 83 harness in a 80 truck no heat or ac working
« Reply #3 on: Dec 13, 2010, 07:38:00 PM »
what about the heater relay and stuff  ?
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: 83 harness in a 80 truck no heat or ac working
« Reply #4 on: Dec 13, 2010, 07:40:25 PM »
what about the heater relay and stuff  ?

i'd have to look at my book and its down in the shop.  ive gotta do some stuff down there tomorrow so i'll look it over then
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: 83 harness in a 80 truck no heat or ac working
« Reply #5 on: Dec 13, 2010, 07:41:09 PM »
didnt i send all the relays and stuff still plugged in??
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Dr.Maxwe001 [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: -23
  • Male Posts: 627
  • Member since Jan '05
  • Crawling with Marlin
    • View Profile
Re: 83 harness in a 80 truck no heat or ac working
« Reply #6 on: Dec 13, 2010, 07:45:00 PM »
yes but where do the hook to on the main harness

DO I NEED THE SEPERATE AC/HEATER HARNESS FROM THE 80 HARNESS ?

and also what is this wire on the back side of the heater box that is on the passenger side almost going out to the engine bay area  it is shaped like a T
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: 83 harness in a 80 truck no heat or ac working
« Reply #7 on: Dec 13, 2010, 07:57:28 PM »
yes but where do the hook to on the main harness

DO I NEED THE SEPERATE AC/HEATER HARNESS FROM THE 80 HARNESS ?
if the 83 didnt have it YES

Quote
and also what is this wire on the back side of the heater box that is on the passenger side almost going out to the engine bay area  it is shaped like a T
need a pic
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Dr.Maxwe001 [OP]

  • Offline Crawler Guru
  • ****
  • Turtle Points: -23
  • Male Posts: 627
  • Member since Jan '05
  • Crawling with Marlin
    • View Profile
Re: 83 harness in a 80 truck no heat or ac working
« Reply #8 on: Dec 14, 2010, 09:37:33 AM »
update:

I have come to the conclusion I am going to have someone (TOYOTA TECH)  look at it they charge 60 bucks to look at it anf then if they can fix it that 60 goes to the price of the repair  :turtle: :turtle: :turtle:

some times it just takes a PRO to work on something

and thats something I am not a PRO
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

 
 
 
 
 

Related Topics

47 Replies
8383 Views
Last post May 06, 2005, 05:16:26 PM
by mtntoy
2 Replies
1153 Views
Last post Nov 16, 2005, 03:34:08 PM
by snowrun
0 Replies
494 Views
Last post May 29, 2008, 10:55:37 AM
by 8Snaces
10 Replies
2023 Views
Last post Dec 19, 2010, 07:00:59 PM
by 83yota
6 Replies
1679 Views
Last post Mar 01, 2012, 07:49:50 PM
by jimbo74