Author Topic: Clutch Plate direction (Read 4015 times)

harley1615 · « **on:** Jun 22, 2010, 07:26:45 AM »

I am installing a clutch and the disk is not marked, (flywheel) side. The disk is offset. Dose anyone know whitch wat to install it? Also it is a used clutch so I don't know where it came from. Thanks for the help!

2manytoys · « **Reply #1 on:** Jun 22, 2010, 07:42:28 AM »

I have done quite a few clutches and I always forget which way they go and resort to the manual. I just put one in my truck (22RE) a couple weeks ago and the manual said the spring side of the hub goes toward the trans.

It also said it goes the other way on Land Cruisers? Never did a Land Cruiser so I wouldn't know for sure about that.

Search this forum also.

harley1615 · « **Reply #2 on:** Jun 22, 2010, 09:55:12 AM »

Thank you for the info.

GNasty 82 · « **Reply #3 on:** Jun 22, 2010, 10:16:46 AM »

Usually, the protruding spring pack in the clutch goes toward the pressure plate, being that the flywheel usually doesn't have room for it.

harley1615 · « **Reply #4 on:** Jun 22, 2010, 12:39:24 PM »

Thanks for all the info ! Much appreciated

Author Topic: Clutch Plate direction (Read 4015 times)

harley1615

Clutch Plate direction

2manytoys

Re: Clutch Plate direction

harley1615 [OP]

Re: Clutch Plate direction

GNasty 82

Re: Clutch Plate direction

harley1615 [OP]

Re: Clutch Plate direction

Related Topics


	Author Topic: Clutch Plate direction (Read 4015 times) 0 Members and 1 Guest are viewing this topic. harley1615 Rock Crawl'n Turtle Points: 0 Posts: 74 Member since Jun '06 Clutch Plate direction « on: Jun 22, 2010, 07:26:45 AM » I am installing a clutch and the disk is not marked, (flywheel) side. The disk is offset. Dose anyone know whitch wat to install it? Also it is a used clutch so I don't know where it came from. Thanks for the help! Logged 2manytoys Crawler Guru Turtle Points: 490 Posts: 583 Member since Nov '09 Re: Clutch Plate direction « Reply #1 on: Jun 22, 2010, 07:42:28 AM » I have done quite a few clutches and I always forget which way they go and resort to the manual. I just put one in my truck (22RE) a couple weeks ago and the manual said the spring side of the hub goes toward the trans. It also said it goes the other way on Land Cruisers? Never did a Land Cruiser so I wouldn't know for sure about that. Search this forum also. Logged 88 Pickup SAS'd, 3.4 V6, R151F Hybrid, Dual Ultimate, Triple sticks, 35's, 5.29's, HP front, V6 rear, Aussies, 63" Chevs, Anti Wrap Bar, Warn 8274 on Home Built Bumper 4WU linked 86 Xtra Cab build in progress harley1615 [OP] Rock Crawl'n Turtle Points: 0 Posts: 74 Member since Jun '06 Re: Clutch Plate direction « Reply #2 on: Jun 22, 2010, 09:55:12 AM » Thank you for the info. Logged GNasty 82 Rock Master Turtle Points: 994 Posts: 206 Member since Nov '09 Get Nasty!!! Re: Clutch Plate direction « Reply #3 on: Jun 22, 2010, 10:16:46 AM » Usually, the protruding spring pack in the clutch goes toward the pressure plate, being that the flywheel usually doesn't have room for it. Logged 82 Toyota SR5 Pickup Marlin Dual Ultimate Front 5.29 LC HP Elocker Rear 5.29 Grizzly Locker BFG 37" KM2s Custom rear frame and flatbed Propane Powered. Build Thread: http://board.marlincrawler.com/index.php?topic=64521.0 Quote from: Toymin8r on Jul 19, 2010, 02:18:05 PM "The two enemies of the people are criminals and government, so let us tie the second down with the chains of the Constitution so the second will not become the legalized version of the first."-Thomas Jefferson harley1615 [OP] Rock Crawl'n Turtle Points: 0 Posts: 74 Member since Jun '06 Re: Clutch Plate direction « Reply #4 on: Jun 22, 2010, 12:39:24 PM » Thanks for all the info ! Much appreciated Logged