0 Members and 4 Guests are viewing this topic.
Chuck'em, get new ones
How many inches of the shock is showing?
i just went out and took a tape measure to it and it's right about 7" but at the moment there's no motor in the truck so i'm gonna say 6" normally. I'm also running all-pro shock hoops. I did look at marlins kit and looks like they go with 12" unless specified so i'd have to guess you'd be safe with 12" shocks as well.
Does it flex ok with 10" shocks?
I had AllPro springs front and rear, and they moved pretty dare good. On the front I mounted the shocks in the factory posion on the axle. And had bump stops set to zero arch for the springs. Under compression I had 1/8" of shock shaft showing, under full droop I had a full 10" of shaft showing. So I guess it would work but good luck mounting it that close to dead on. Go get some 12"s and make life easy for yourself.
Started by TigerToy Parts Wanted
Started by crawlingturtle Parts Wanted
Started by nate650 Parts For Sale
Started by Bert Vega Parts For Sale
Started by GloNDark Parts Wanted