Topic: rotated dual case adapter ?????

[possume22]

how much clearance will you gain under yout t case with a rotated dual adapter

[Talon84x4]

I want to say I got close to 2", but I would have to double check. Remember that the gain doesn't help unless you get/make a cross member to take advantage of the clocking. 

[possume22 [OP]]

ok thanks i made my own crossmember just wanting to go flat belly but need to get my t case up dont want to cut my tunnel out but if it will give me 2 inches i can raise my crossmember about 2  more inches and then just put a solid plate under my frame

[Phazertwo]

WORTH IT! However you will have to change your cross-member.  Also, I would gusset that thing. I have seen allot of those posted busted where the tube is welded to the plate.

My .02

PZ

[possume22 [OP]]

im not worried about gusseting it. the pipe is slit and plate slide in it some and welded well been running for a year now.the ones that posted busted i wonder what they was made out of and how good they where welded. im just wanting to make my belly flat and needing to know how much clearance i will gain using a rotated adapter im going to drop my truck 4 to 6 inches so i want be as top heavy

[Phazertwo]

im not worried about gusseting it. the pipe is slit and plate slide in it some and welded well been running for a year now.the ones that posted busted i wonder what they was made out of and how good they where welded. im just wanting to make my belly flat and needing to know how much clearance i will gain using a rotated adapter im going to drop my truck 4 to 6 inches so i want be as top heavy

You will still have to rotate the bolt pattern if you get a R10.

PZ

[possume22 [OP]]

ok thanks that want be a problem

[TacoRunner]

how much clearance will you gain under yout t case with a rotated dual adapter

1 3/16"

[possume22 [OP]]

is that all you got 1 3/16 know im wondering if it would even be worth it lol

[TacoRunner]

Thats all anyone gets.

 Because the case is only designed to rotate enough so that the bottom of the Tranny and T-case are level to each other. There would no point in going more, it would only worsen you drive line angle. As for it being worth it, if you dont already have a dual case adapter then yes its worth it.

[possume22 [OP]]

thanks tacoRunner i never heard that it just levels the case with the tranny i thought it moved it more im lowering my truck so driveline  wouldnt be a problem and i got a hi pinion already and got duals so dont think its what i need thanks for your help

[TacoRunner]

Not problem dude, just let me know when you are ready to link your truck.