0 Members and 7 Guests are viewing this topic.
i put a header on my yota and left the smog stuff just sitting there unhooked. now my runner bogs at low rpm and really kicks in at high rpm. is my smog pump my problem and if so, what should i do to fix it?thanks.
the truck is an 88 but i got the motor a couple years ago and it only has 15k on it. i did leave my o2 hanging im going to go drill out the hole in the header right now and hook it up and see if that does it. the tube to the smog pump is just open. do i need to block it off?
IronClad: If I wanted to hold hands and be nice I'd become a hippie.
2.5" exhaust sounds like too much; on wildyoats.com there's an exhaust thread and it says no more than 2.25" to maintain decent backpressure with a header.Had a similar issue with my 79; put 2.5" on stock exhaust... was a dog after tuning. Found junkyard long tube header, installed with 2.25" pipe and Thrush muffler (also turn-down in front of axle) and the truck is quicker now. Hell, might even try 2.0" pipe or would that be way too restrictive? and good luck!Dan
the 22r downey exhaust is 2.5.... its huge!have one sitting in my backyard
Started by ol yeller Parts For Sale
Started by allbones Toyota Pickup/4Runner Tech 1979-95
Started by TXSS Parts Wanted
Started by toyotamobing Parts Wanted
Started by BABYTOYOTA Toyota Pickup/4Runner Tech 1979-95