Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 7 Guests are viewing this topic.

79coyotefrg

Quote from: billybobf on November 07, 2007, 07:10:32 PM
dang...that sucks....but, I gotta ask, WHY post nudies of your girl ONLINE?
he didnt post them  he just had the "stored"  on photobucket

he didnt think about perverts  using  the link to see all his pics
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Jordan7118

I must have missed it, but what's wrong with the Turbo truck  :headscratch:

If I were to build a vehicle from your fleet, Glen, I'd SAS the Turbo truck with your solid front. Then I'd sell off whatever else I didn't need and trade with Marlin for some gears for your L52HD. But, that's just my .04  :yupyup:

How much you want for the Turbo truck? What are you using from it anyway?  :eyebrow:

79coyotefrg

the rear axle,  steering box  will be used,  tranny and tcase going to Marlin,  for something VERY NICE  :eyebrow: 

later   i might try and find a  auto transmission  to go in it :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Jordan7118

If you change your mind, I have a home for that tranny and transfer case :yumyum: :psss:

Rocksurfer

Quote from: 79coyotefrg on November 08, 2007, 08:04:18 AM
the rear axle,  steering box  will be used,  tranny and tcase going to Marlin,  for something VERY NICE  :eyebrow: 

later   i might try and find a  auto transmission  to go in it :dunno:

Hey Glen you know Painless now has a torque converter lock-out for the Toyota auto's now.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

um  ok,  :headscratch:


ok guys  NEW  problem

the white cab i have  has  some  drip edge rot  around the top of the cab,  i aint never seen this problem,  and  Josh said he hadnt either,  after looking it over today  and doing a little brain storming im going to carefully  cut the roof  and  back of the cab  of  this truck  and then  do the same with my wrecked truck,  so i'll be using  best parts  of  the two  cabs


the  welding will be across the floor behind the seats  and  at the bottom corners of the windshield
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

well i DO  kinda  walk like Egor   
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

DanS

Glen, out of curiosity does the cab have a sunroof? If so check the drain holes for blockage, if not crap!!!!!!!! Up here rust is just a way of life  :dunno:
Any pics  :confused:
DanS
Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!

79coyotefrg

Quote from: DanS on November 08, 2007, 05:05:52 PM
Glen, out of curiosity does the cab have a sunroof? If so check the drain holes for blockage, if not crap!!!!!!!! Up here rust is just a way of life  :dunno:
Any pics  :confused:
DanS
i understand  Dan  but rust IS NOT  an option  :nope:

no  no sunroof on that one  and where i wheel a sunroof  might be dangerous,   dead tree limbs falling all the time  :aaa:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Willy Mammoth

Quote from: 79coyotefrg on November 08, 2007, 03:37:38 PM
um  ok,  :headscratch:


ok guys  NEW  problem

the white cab i have  has  some  drip edge rot  around the top of the cab,  i aint never seen this problem,  and  Josh said he hadnt either,  after looking it over today  and doing a little brain storming im going to carefully  cut the roof  and  back of the cab  of  this truck  and then  do the same with my wrecked truck,  so i'll be using  best parts  of  the two  cabs


the  welding will be across the floor behind the seats  and  at the bottom corners of the windshield


::)


:worthless:



:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  

Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

79coyotefrg

i'll pull the seats  as soon as i can  and  take pics of where i plan to cut,  oh  and i plan to have the floor  overlap  by  at least 2 inches
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Willy Mammoth

Quote from: 79coyotefrg on November 08, 2007, 07:12:11 PM
i'll pull the seats  as soon as i can  and  take pics of where i plan to cut,  oh  and i plan to have the floor  overlap  by  at least 2 inches



:yikes:

Let's see what is so bad you want to cut it up like that.

How bad is your old cab? You could just get it pulled back ond use it. Where is it bent?

:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  

Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

79coyotefrg

diagonally  across the floor  from  pass floor thru trans tunnel



i'll show ya pics,  i talked to a guy thats done it befor,  he said the factory  seem  is right close to where i want to cut,  he's gonna come over tomorrow  and show me where to drill
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#1305












AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

CTENG in KS

Glen...someone with your luck should probably wear gloves...
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

DTB

Quote from: CTENG in KS on November 10, 2007, 04:27:20 PM
Glen...someone with your luck should probably wear gloves...
is that josh? looks like a wedding ring on the finger
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

CTENG in KS

Oh, never mind then, Glen has a pit crew.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

79coyotefrg

Quote from: DirToyBoy on November 10, 2007, 04:31:23 PM
is that josh? looks like a wedding ring on the finger
nope,  thats Gittinit  and he says :wave:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

we  had to  cut the front clip into pieces  to get it off
but we ran out of daylight
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

DTB

RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

79coyotefrg

#1314
front end cut off 





taking a break :thud: good thing i had pain killers  :ack:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

Jordan  removing the driveshafts and  crossmember to tcase bolts :whip:



ITS OUT  :willynilly:   
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

1950 Plymouth  we saw at Walmart 


taking a  test drive  :disturbed:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

:bat:  somebody cant  hold a camera 
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way