Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 6 Guests are viewing this topic.

tom w.

I'm sorry to see that glen

brc

my wifes uncle is a floor manager at the WARN plant in OR.  I can probably get you what ever you need
1999 CTD 2500 Sport TST/MBRP/AFE/K&N and Quadzilla 315's yada-yada-yada
1985 Four runner 5in lift 35's lockers etc.
1973 FJ buggy project INWK 3RZ SM420 Mini Axles and Aluminum tub/cowl building to be light weight

DanS

Glen, just signed on to see the pic's of your toss up, are you OK? Are you going to rebuild on a budget? Keep us posted.
DanS
Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!

79coyotefrg

Quote from: brc on October 03, 2007, 11:47:49 AM
my wifes uncle is a floor manager at the WARN plant in OR.  I can probably get you what ever you need
i talked to a WARN rep  and  she gave me the part number i need so hopefully  that  "end cap" on the electric motor  is all i need 


Quote from: DanS on October 03, 2007, 05:22:36 PM
Glen, just signed on to see the pic's of your toss up, are you OK? Are you going to rebuild on a budget? Keep us posted.
DanS
thanks Dan,  yes  im ok, i was  very lucky  i wasnt  more seriously injured



yes  i am going to rebuild,  my friends  at the scrap yard  have a  80 toyota pickup   that i need to get tomorrow
somehow :ack:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

tom w.

Are you gonna be able to re-use everything from this truck?

DanS

Great to hear, keep up the heavy duty building, I'm guessing that helped in you walking away from the accident!
If I lived closer I'd be there to help, again good luck and keep us posted.
DanS
Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!

79coyotefrg

thanks guys,  yes  i will reuse  everything possible  the truck  i  am getting  is  basically a cab and  frame  with axles 

which is all i need  :woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

tom w.


79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Colt

Hi Glen, sorry to hear and see that with you and your truck!  :down: Are you injured?  :crossed: Hope not...

Hope you could rebuilt your truck soon!

79coyotefrg

Quote from: Colt on October 05, 2007, 12:26:00 AM
Hi Glen, sorry to hear and see that with you and your truck!  :down: Are you injured?  :crossed: Hope not...

Hope you could rebuilt your truck soon!
thanks Colt,  yes  i was injured,  my head busted the windshield out  and my leg hit the tranny shifter  HARD,  paramedics  thought it was broke  but xrays  said it wasnt :screwy:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Colt

Hey Glen, get well soon! You have hard bones... Outch!

79coyotefrg

tough bones  but  apparently  not the case for  other tissue,  after having  extreeme headaches all week,  i sought further help yesterday  LUCKILY 

the ligamints/tendaons in my neck were severly damaged,  causeing  much of the  nerve  problem i have.  the  lawyer noticed  i was having trouble  making my words  and when signing my nam i couldnt seem to remember how to make a 'D'  so he sent me to a chiropracer friend of his  to do exrays,  there they found my c1 and c2  were badly misalined  this is why  my hands and eyes  arent conneting properly,  he  also said  i had  sweeling in my skull  called it a traumatic brain injuy  i thought this was the same as a concussion but he said it was   actually worse  that i SHOULDave been hospitaled  the day of my weck  but its been 6 dayds  so  he said  to just rest  and  to  talk here  as much as i could stand  to keep  my eyes and hands  wanting to work
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

CTENG in KS

Not to be mean, but chiropractors are not real doctors.  I would go see a real doctor to confirm the diagnosis or get a second opinion.  It may be more serious than "out of alignment."
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

Willy Mammoth

Quote from: CTENG in KS on October 06, 2007, 05:49:48 AM
Not to be mean, but chiropractors are not real doctors.  I would go see a real doctor to confirm the diagnosis or get a second opinion.  It may be more serious than "out of alignment."


X3
:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  

Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

Lady Di

Quote from: Willy Mammoth on October 06, 2007, 05:58:26 AM

X3

X10! You do not need to have a medical license to be a chiropractor.
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

brainlessfool

Quote from: CTENG in KS on October 06, 2007, 05:49:48 AM
Not to be mean, but chiropractors are not real doctors.  I would go see a real doctor to confirm the diagnosis or get a second opinion.  It may be more serious than "out of alignment."

X100 this is not some thing to mess with. plus if it comes to it in couat a chiroprator's word is not much next to an M.D's word.
A good day working, that's just sick :reg:

SWAMPER

dang glen you need to go get checked out that sounds scary :nerv:
1985 Toyota Pick/Up longbed...bobbed 15",  lifted 5", 36's.....http://board.marlincrawler.com/index.php?topic=36992.0

Willy Mammoth

How would you like to be paralyzed from the neck down?

Go to the doctor ASAP and get checked out in full.

Tell them you want a full MRI to make sure there no hidden problems now before you settle with anybody.
:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  

Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

BUBBA

X100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Go to the doctor.Don't worry about the cost.If she was at fault she is LIABLE.
87 4runner 350 with custom dent package. 
My budget beater

V-Man

Quote from: 79coyotefrg on October 01, 2007, 04:08:00 PM
well it wasnt a minivan  :headshake:

:yikes:
   I am sorry to hear about the crash.. Can you tell us how it happened or are things still being investigated? :shhh:

   :rivers: sorry to see the truck in that shape. 

79coyotefrg

Quote from: V-Man on October 06, 2007, 04:11:30 PM
:yikes:
   I am sorry to hear about the crash.. Can you tell us how it happened or are things still being investigated? :shhh:

   :rivers: sorry to see the truck in that shape. 

heres  the thread  :thud:   
http://board.marlincrawler.com/index.php?topic=37468.0
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way


79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Oddmar

Did'ja get the 'scrap yard' 1st gen truck, Glen?
The United States Constitution © 1791. All Rights Reserved.
+++++++++++++++++++++++++++++++++++++++
Only when i am finished will there be peace: The peace of an empty wind as it blows across a land strewn with the bones of my enemies.

THK Matt

dang glen! lucky man....im mjust glad your doing alright..
get better soon my friend.

make that 1st priority.
and keep us all updated.

take care buddy... we all love ya
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

79coyotefrg

Quote from: Oddmar on October 06, 2007, 09:17:00 PM
Did'ja get the 'scrap yard' 1st gen truck, Glen?
yes i did  :thumbs:  pics  as soon as im able to getthem
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

THK Matt

is it done yet..... haha. yall crack me up on here.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way