Topic: Harness Question- need answers ASAP

[crawlerdan]

I have a 1987 toyota 4runner efi 5spd

will the wiring harness from a auto trans equiped runner of the same year work?

i need to replace the headlight harness, alot of the engine harness, ect.

[boggerunner]

yep, but u will need to bypas the park switch

[crawlerdan [OP]]

yep, but u will need to bypas the park switch

thats it? how do i bypass it?

[KYOTA]

you have to find the park switch and jump wire it. I found this out when I swapped cabs on an old 69 GMC froma manual to auto and it wouldnt start untill I remembered the park switch had to be jumped

[THK Matt]

its under the intake plenium... I can go snap a pic of that plug?! the truck I pulled the 22RE out of for the 85 had an Auto harness and we swapped a W56 into it.

[THK Matt]

crap it was thrown away today

it's just a jumper wire on the plug that goes to the park/neutral switch.

[boggerunner]

i couldnt find it either, so i cut into the wire right off the ignition switch, and ran it to the starter

[WHITE_TRASH]

The neutral safety switch is on the shifter in teh auto rigs.  It's jumped right at the plug the wires are large white with a black stripe if I'm remembering correctly..... It's been a few years.

[crawlerdan [OP]]

ok, well i guess i found a harness then  8)