Topic: INTERLOCK PIN HELP!!

[mudmaster]

I'm trying to do my twin stick and can't get the interlock pin out     Anyone know any tricks to get it out???

[YodaKrawler]

if you have a air compressor you can blow it out for the other side what part are you stuck on i have done this for my shifters.

[blackdiamond]

I remember mine being a pain to get out and it ended up at the bottom of the case.  It took some magnet fishing to get it back out.  Good Luck.

[mudmaster [OP]]

I'm down to just getting the pin out. It looks like the PO may have beat on it?? It will move when I move the shift rail in and out. It acts like it's some how binding in the hole. I've tried the air trick and a magnet won't pull it out either.

[4RunnerChevy]

When I turned my t-case on its side, it fell out.

[joey0712]

I always use a strong magnet or hit the side of the case with a rubber hammer till it falls out.

[mudmaster [OP]]

I always use a strong magnet or hit the side of the case with a rubber hammer till it falls out.

Doing that now. Still won't come out

[4RunnerChevy]

Just a thought, maybe spray cleaner in there, get a probe with a little strong glue.  Get the probe to glue to the pin and wait for it to dry.  Wigglel pin out.  Far fetched, but it has been done before in other applications.