Topic: Message #623301

[Dr.Maxwe001]

well i have some updated pict. for everyone. I didnt have to much to do this Saturday morning however I am well aware of my dead line. (twins birfdays)

this is the bolt that someone   put way to close to the exhaust pipe and burnt the end down  






In this picture you can see that I have cut off the old bumpstop  but Ihave not grinded it down smooth


In this picture you can see the Old shock mount after I have cut it off I havent goten to close to the frame untill now I used the troch to get as close as I could with out cutting a hole in the frame.


this is the drivers side bumpstop after i cut it and before I grinded it smooth


dirvers side before I grinded it smooth


this is where i had to cut the exhaust to clear the stupid bolt


this is a pict of the exhaust (in case you have never seen one)


this is a picture of the passenger side bumpstop after I grinded it down smooth


this is a picture of the passenger side  old shock tower after I have grinded it down smooth

 
passenger side before I grinded it smooth


  I got to close with the   and I cut a hole in the top of the frame   I guess I will have to fill that up with a welder  


passenger side bumpstop grinded down smooth


drivers side top after I grinded it smooth


passenger side grinded smooth and painted to keep it from rusting


passengers side old bumpstop painted to keep it from rusting


passengers side old shock tower area painted to keep it from rusting


   Oh the sweet bitter end I have no Oxygen  I cant go any further with the torch cause i dont have anyone in the local area that has any mind to open up on a saturday morning and sell oxygen