0 Members and 4 Guests are viewing this topic.
I used white lithium grease in my oil pump as well. I also cranked the engine over a couple of seconds at a time for several minutes to build some oil pressure (using an aftermarket oil pressure gauge) before starting.
I got the upper intake off of the 88 engine. Once i got the upper intake off, I could tell something was wrong. I saw pools of oil in the lower intake (see pics). I looked up into the upper intake and all of the carbon which is usually rock solid was loose and oily. The oil smells like gas, so I think my cold start injector is leaking. I think I will send my cold start injector to HERE to get refurbished. What would cause that much oil to accumulate in my intake? Any ideas?
Started by SWAMPER « 1 2 » Engine
Started by gotrocks « 1 2 ... 8 9 » Project Research and Build-Ups
Started by toeyota Project Research and Build-Ups
Started by 79coyotefrg Toyota Pickup/4Runner Tech 1979-95
Started by DeMented Toys « 1 2 ... 12 13 » Project Research and Build-Ups