Author Topic: finally sas time (Read 12741 times)

Joey88RUNR · « **Reply #30 on:** Oct 20, 2008, 10:17:21 PM »

5"s Wont be stiff at all...it will ride better than ifs...my opinion

lucky7 · « **Reply #31 on:** Oct 20, 2008, 10:24:38 PM »

One day i'll figure out how to link my pics from the bucket but i would run 5's but itry to wheel alot so i break them down pretty good you might get away with 4's in the front but not the rear.I think i have some pics though go to photobucket and look up lucky7runner

bad luck · « **Reply #32 on:** Oct 21, 2008, 08:25:32 PM »

lucky you have 5s on your rig rite is your front hanger mounted flush or pushed forward

and is that your trany cooler under the rear??

lucky7 · « **Reply #33 on:** Oct 21, 2008, 08:28:59 PM »

front hanger is 1.5 forward and yeah i run an auto tranny cooler is a must 2 tranny's later

bad luck · « **Reply #34 on:** Oct 21, 2008, 08:37:06 PM »

my setup is 22re an w56 so no cooler for me

do you measure from the bolt holes or the center of the hanger Ive Ben wandering this for a while

lucky7 · « **Reply #35 on:** Oct 21, 2008, 08:40:27 PM »

No it's marlins and you can mount it forward or spin it to stock

bad luck · « **Reply #36 on:** Oct 21, 2008, 08:42:38 PM »

OK thats my shackle problem there striate up and down with the springs i got

lucky7 · « **Reply #37 on:** Oct 21, 2008, 08:46:22 PM »

What springs did you end up with?

bad luck · « **Reply #38 on:** Oct 21, 2008, 08:49:16 PM »

well the 85 i got the axle from had new ranchos 3.5s but it sounds like the way i set mine up
will work with the 5s

my ifs was so badly beat up that with SA i got better mpg

lucky7 · « **Reply #39 on:** Oct 21, 2008, 08:55:17 PM »

Are those waggy's or toyota springs i think that would make a differrence

bad luck · « **Reply #40 on:** Oct 21, 2008, 08:57:23 PM »

the waggy's seam a little shorter than the ranchos i had

i haven't put my shock hoops in yet till i get it set up rite i also haven't cut the ubolts ether

lucky7 · « **Reply #41 on:** Oct 21, 2008, 08:59:49 PM »

I suggest save up some cashish for some marlins what about that ass end started that yet?

bad luck · « **Reply #42 on:** Oct 21, 2008, 09:02:04 PM »

i got another housing and rear shackle hangers im going to get the front more to gether first

lucky7 · « **Reply #43 on:** Oct 21, 2008, 09:07:45 PM »

When you get ready i can take some measurements for you mine came out almost perfect but i think i need to move my rear sckle hanger forward about an 1" and run a little longer shackle for a bit more droop.

bad luck · « **Reply #44 on:** Oct 21, 2008, 09:13:53 PM »

i just mainly needed to get all that ifs stuff out of there

the high steer is perfect lined up no rubbing no death wobble

lucky7 · « **Reply #45 on:** Oct 21, 2008, 09:16:17 PM »

cool.

bad luck · « **Reply #46 on:** Oct 21, 2008, 09:20:29 PM »

the front axle knuckle seals don't leak at all the truck i got it from was like never 4x4

and the rear shaft that is on my runner is thick tubing

bad luck · « **Reply #47 on:** Oct 26, 2008, 04:30:54 PM »

got a 7500 credit card

so I'm going to order up all around 5' springs an some longer b-lines
any one know how much shipping will be to Chico CA 95926

unclejpl4x4 · « **Reply #48 on:** Nov 08, 2008, 08:42:56 AM »

Quote from: bad luck on Oct 26, 2008, 04:30:54 PM

got a 7500 credit card

so I'm going to order up all around 5' springs an some longer b-lines
any one know how much shipping will be to Chico CA 95926

ya i got tired of waiting for $$ and charge all of my parts ................ now my

is sore and alot of my $$ gose 2 the darn CC

bad luck · « **Reply #49 on:** Jul 09, 2013, 05:53:58 PM »

OK its Ben long time that 4runner is long gone but I've picked up a new one picked it up for $900 its 90 4runner 3vze 5spd finally found one with wing windows like my last one love those things.

I have a complete 84 front axle with new highsteer an spring hanger plus u-bolt flip kit I've got 2 v6 3rd members so far that's it might take me a bit to get rest of the parts but doesn't always

im not wanting to go to tall with this one thinking of staying around 35's

bad luck · « **Reply #50 on:** Jan 20, 2014, 01:09:03 AM »

Ive Ben gathering parts like LC high pinion and 01 4runner calipers/rotors pnp

needin to find some welding help in Oroville area cant drive it to far leaky headgasket

bad luck · « **Reply #51 on:** Feb 15, 2014, 08:38:51 AM »

ok I got axles with 5.29 open infront spool in rear 36 iroks the swap will start soon

im keep the high pinion regear later

bad luck · « **Reply #52 on:** Feb 17, 2014, 03:27:04 PM »

got some 5hd springs on there way

bad luck · « **Reply #53 on:** May 13, 2015, 07:26:26 PM »

ok finally getting started doing the sas on my 94 4runner got the frame tubes put in today

bad luck · « **Reply #54 on:** May 14, 2015, 02:19:18 PM »

lol noticed a hadn't up dated this with my newer 4runner its a 94 sr5 v6 has every option has code g144 when I got it looked like it never been off road kinda clean till I took it into my back yard almost got it stuck about mid way threw was like this wasn't a good idea

what ive got to throw at it so far

axles with 5.29's an high steer
2000 4runner front rotors calipers an mounting brackets
5"hd front springs/hanger kit
transfercase adapter
front bumper

haven't decided really on what im going to do on the rear ive been told to just get chevy 63's im shure that wont be enough to match the front

Dingman. · « **Reply #55 on:** May 14, 2015, 05:22:18 PM »

I had to run 63" chevys with 2" blocks and 7" shackles to match my mix of allpro/trailgear 4" packs in the front.

bad luck · « **Reply #56 on:** May 14, 2015, 06:21:43 PM »

I don't remember would it be best to use 2wd or 4wd 63's

bad luck · « **Reply #57 on:** May 29, 2015, 05:57:40 PM »

yay ifs no more its on the dirt next to the 4runner finally

ill start gettin pic's up as soon as I figure it out again

bad luck · « **Reply #58 on:** Jun 05, 2015, 05:02:34 PM »

lol so much easier doing the pic's threw my pc the trying photobucket

bad luck · « **Reply #59 on:** Jun 05, 2015, 05:05:47 PM »

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

bad luck [OP]

Related Topics